The CZickness XLIV Girding our loins for 2022

[T-DOGG]

If anyone is interested, my BIL is selling his Kimber K6s .357 revolver for $850. Model# K6S DASA 3 inch.

 

[Leadeye]

Coffee always tastes better the colder it gets outside.

 

[rkwhyte2]

Morning all

 

[Benp]

Morning all!
I'm going a bit slow today. Yesterday I hurt my back a little moving some boxes of paper at work. It was going fine until I got the stack perhaps a bit too high. A hot shower this morning seemed to really help. I'm not out of commission, but I am having to really slow down so that I don't hurt it further.

 

[Ruger_Ronin]

I stopped down at USDS yesterday and was looking at a Saginaw M1 Carbine that they had gotten in but had not priced yet. It’s an early, non-re-arsenaled rifle in decent shape. No import marks that I could see. I made an offer and Chad will give me a call after he’s done some research on it. Fingers crossed right now, as I have been wanting to add another M1 Carbine to the family.

I don’t know why, but I really like those rifles. They’re handy little things.

I went into the Columbus satellite store for the first time yesterday. Didn't have a whole lot, hopefully they send more stock. Had some barrels of interest, but all were midlength gas tubes.

 

[Born2vette]

The only thing I don't like about the one he got is that it doesn't have front strap checkering, but that's easily fixed either by putting Pearce finger grooves on it, or having AllenM add the checkering.

Anyone have experience with this? Was thinking of trying it out on my SA RO

Checkered Frontstrap | Blue

Checkered Frontstrap, Blue

shopwilsoncombat.com

 

[patience0830]

Anyone have experience with this? Was thinking of trying it out on my SA RO

Checkered Frontstrap | Blue

Checkered Frontstrap, Blue

shopwilsoncombat.com

Do you epoxy it in place?

 

[MindfulMan]

Yes and no. Think it was too late when I tested already. She's developing the cough. Calling her Doc at 0800 to ask about monoclonal antibodies.

Oh my.......hang tough, my friend !

 

[patience0830]

Best wishes for you both to have speedy recoveries.

Barb tests negative this morning but I think it's just too early in the process.

 

[gmcttr]

Barb tests negative this morning but I think it's just too early in the process.

Fingers crossed and in my prayers.

Up bright and early late at 11 today. Sleep schedule still screwed up but at least I'm getting the hours in.

Binging on Godless last night.

 

[gmcttr]

Post war Mauser in classies...

WTS: - SOLD Yugo M48A 8mm Mauser

It’s in fine condition, postwar made in the 50’s. 95% bluing, perfect wood nice bore etc. All matching numbers except magazine floor plate. Includes matching numbers bayonet and frog. Bought it about 30 years ago, completely dissembled, cleaned, test fired and put it away. $450

www.indianagunowners.com

 

[T-DOGG]

Do you epoxy it in place?

Says it's held in place by the grip panels.

 

[ChrisK]

Post war Mauser in classies...

WTS: - SOLD Yugo M48A 8mm Mauser

It’s in fine condition, postwar made in the 50’s. 95% bluing, perfect wood nice bore etc. All matching numbers except magazine floor plate. Includes matching numbers bayonet and frog. Bought it about 30 years ago, completely dissembled, cleaned, test fired and put it away. $450

www.indianagunowners.com

I paid $80.00 for one 30 years ago...Still have it..

 

[ChrisK]

He is a post I made you guys might want to look at. https://www.indianagunowners.com/threads/vaccine-adverse-events-reporting-system-vaers.516165/

 

[ChrisK]

Anyone have experience with this? Was thinking of trying it out on my SA RO

Checkered Frontstrap | Blue

Checkered Frontstrap, Blue

shopwilsoncombat.com

Ordered one to try out.

 

[patience0830]

Hey guys. My son has written a children's book and he's trying to scrape together some funds to get it illustrated and into print . He's been getting the drawings done at $35 a page as he can afford to but I'd like to get him jumpstarted if anyone has a few bucks they can spare, he'd be grateful and so would I.

 

[bcannon]

Anyone have experience with this? Was thinking of trying it out on my SA RO

Checkered Frontstrap | Blue

Checkered Frontstrap, Blue

shopwilsoncombat.com

I used one from Wilson Combat on my SA Lightweight Loaded before having Allen checker it for me. Spicey is right, it's held on by the grip panels. No need for tape or adhesives, it stays put nicely and it works great for the price. Its also easy on the fingers for those with sensitive fingers.

Edit- I shouldve opened the link, that's the one I used. You won't be disappointed.

 

[mmpsteve]

Morning all!
I'm going a bit slow today. Yesterday I hurt my back a little moving some boxes of paper at work. It was going fine until I got the stack perhaps a bit too high. A hot shower this morning seemed to really help. I'm not out of commission, but I am having to really slow down so that I don't hurt it further.

Hope you get better. It's amazing how heavy paper can be. We just printed a big job on 13x19 100# gloss coated cover. The cases are only about 7" tall x 13 x 19, but that stuff is heavy.

.

 

[bcannon]

Hey guys. My son has written a children's book and he's trying to scrape together some funds to get it illustrated and into print . He's been getting the drawings done at $35 a page as he can afford to but I'd like to get him jumpstarted if anyone has a few bucks they can spare, he'd be grateful and so would I.https://www.kickstarter.com/projects/dpn/dread-pirate-nova?ref=nav_search&result=project&term=dread+pirate+Nova&fbclid=IwAR2xiuaVPrJKMwOh9zdFXvczyzJQ3z1FYEhP2fFDL9pKkB9c5Cu144-a6j0

Would be glad to help. Can't get the link to work..

 

[bcannon]

Barb tests negative this morning but I think it's just too early in the process.

Hope it stays negative for the both of yours sake. There's a incubation period but with all the variants not sure who could guess the time frame. Prayers and positive energy for both of you.