They are our better halves.
You betcha
They are our better halves.
One more for black... goes well with the gun.
I'll add another vote for the black screws. They just go well with that pistol and those grips. What type of Magwell is that? I may look into something like that for my A2.
This is most interesting can you tell us what size the O ring would be?
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each
So I got a second wind.
It begins.......
Fitting the magwell and the pearce grip enhancments.
Do we like the black grip screws.........
Or the Stainless ones.....
What say you all.
Edit......Not shown is the 1 piece guide rod.
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each
It is strange how I can do 2 same CZ's and do all the polishing the same install the goodies and one may feel better than the other in DA. It is much easier to match the single action break. The double actions are not as easy to accomplish. Most of them require many rounds to really mate to parts together giving the feel of butter. My thought is that the quality control of stock component parts that are kept with the addition of the CGW parts cause some of the variations we feel. Remember that the CGW parts are made to be drop in parts in all CZ's so you will see them in some guns turn out extremely good and some guns just good. Then there are some that will require fitting of the disconnector to achieve reset in SA & DA. To some degree I can take the good gun and make excellent by a little polish to fit and sometime nothing extra to gain and will need rounds downrange to smooth things out. On some guns I will put a rubber O ring over the firing pin for the hammer to hit and set and watch tv while pulling the trigger in DA lets say for 1000 pulls switching fingers and hand and can feel a difference in smoothing out.
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each
My mind is working a little slow tonight. Where are you placing the O-ring?
Awesome set up CM, I bet they love it!The terrorists are having a blast.....The swim deck is a success.....
https://i.imgur.com/Fq9DCBT.mp4