So.. what are you reloading at the moment??

[42253]

270 Winchester

 

[Trapper Jim]

Breaking away from my normal heavier bullet syndrome, I been stuffing 5.5 Hercules Bullseye under these 185 XTP’s torched with WPP. O.A.L. Is 1.245”.

Clock says 925 average fps with a SD of 7.

See you on the range

Trapper

 

[bgcatty]

I did 500 rounds of .223 on the Dillon 550b in a few hours this afternoon.
A great therapy session!

 

[Michigan Slim]

As soon as the weather cools I need to cast round balls for a buddy. He shoots a lot of.36 cal BP in cowboy action with us.

 

[bgcatty]

Worked with the Dillon 550b for a couple of hours yesterday and cranked out another 300 rounds of .223 “plinking” ammo.

 

[Michigan Slim]

Worked with the Dillon 550b for a couple of hours yesterday and cranked out another 300 rounds of .223 “plinking” ammo.

I did the same last winter when the ice was too thin to fish. Thousands.

 

[Wolfhound]

Loading some .38 Smith and Wesson for the first time. Sort of like a .38 special short. A 140 grain lead bullet over 2.5 grains of Green Dot.

 

[pdg45acp]

40 S&W on the Dillon... 223 on the RCBS

 

[yetti462]

10mm blue dot loads as I type.

 

[Creedmoor]

I processed a few thousand 5.56 cases on the Dillon 1100 today.

 

[bgcatty]

Reloaded today 500 rounds 9mm with 124 grn projectiles over CFE Pistol on Dillon 550b.
Good therapy!

 

[yetti462]

Loaded another flat of 10mm. Bored with the rain , I decided to open up a coffee can of brass and deprime it. Tumbling now, if it rains again I'll start making it useful again.

 

[dieselrealtor]

Lots & lots of 223/5.56 processing on the automated Dillon

 

[DadSmith]

Breaking away from my normal heavier bullet syndrome, I been stuffing 5.5 Hercules Bullseye under these 185 XTP’s torched with WPP. O.A.L. Is 1.245”.

Clock says 925 average fps with a SD of 7.

See you on the range

Trapper


View attachment 378928

That's where I'm headed with 45acp as well. The 185gr gives it good velocity with CFE Pistol. A little over 1100 in 1911. I can't remember the grains exactly. It was over 8gr. I'd have to look it up in my notes to be sure.

 

[DadSmith]

Loading some .38 Smith and Wesson for the first time. Sort of like a .38 special short. A 140 grain lead bullet over 2.5 grains of Green Dot.

Where did you find .360 caliber bullets?

 

[Wolfhound]

Where did you find .360 caliber bullets?

I’ve been using .357/.358 diameter with no noticeable issues. I have two handguns chambered in .38 Smith and Wesson. If I ever acquire a gun that won’t shoot the smaller bullets good enough I will certainly look at the .360 diameter.

 

[DadSmith]

I’ve been using .357/.358 diameter with no noticeable issues. I have two handguns chambered in .38 Smith and Wesson. If I ever acquire a gun that won’t shoot the smaller bullets good enough I will certainly look at the .360 diameter.

I have an old revolver around very early 1900 in 38 S&W. I had a few .360 caliber bullets for it, but haven't seen any for years. So was hoping you had a line on some.

 

[Wolfhound]

I have an old revolver around very early 1900 in 38 S&W. I had a few .360 caliber bullets for it, but haven't seen any for years. So was hoping you had a line on some.

Ah I see. I have been looking at old H&R top break revolvers from that time frame on Gunbroker. Cool old guns and don’t break the bank.

 

[tomcat13]

Working up some 9mm Plinkers.
Twice fired brass, W-W SP Primers, 147g Cast RNFP over 3g Bullseye.
Dad's cast pills.
RIP & eternal Thanks SSGT RMM.

 

[Creedmoor]

I have an old revolver around very early 1900 in 38 S&W. I had a few .360 caliber bullets for it, but haven't seen any for years. So was hoping you had a line on some.

MOYERS CAST BULLETS

CAST LEAD BULLETS FOR RELOADING

www.moyerscastbullets.com