So.. what are you reloading at the moment??

[JTKelly]

Just finished my 10mm and started working on 45acp this afternoon.

 

[spencer rifle]

Apparently about to venture into 300WM. Looking at H1000, 190 grain bullets and LR mag primers. Advice welcome.

 

[Michigan Slim]

.38 Special Cowboy loads. Using W244, 3.6 grains with a 125 grain RNFP.

 

[tomcat13]

45 Colt-230g FMJ over Unique, with WW Primers to touch em off.
(Once fired R-P Brass)

 

[bgcatty]

.30-06 Match ammo for my M1 Garand.
Why not?

 

[bgcatty]

Switching over to .30-30 Winchester today for reloading. Hope to get 150 rounds loaded today.

 

[edwea]

Going to start some 115 gn. Barnes Tac-Tx in 6.5 grendel. Planning on using BL-C(2). Anyone loading this bullet in 6.5 G?

 

[bgcatty]

I got the 150 rounds of .30-30 done as noted. Now going to work on 100 rounds of 7.5x54 French for my son’s MAS36.
Should be fun.

 

[STFU]

2,000 subsonic 9mm completed.

Now back to some subsonic 300BLK!

 

[CCPLuvr]

Starting load development on some 223 for the AR15 using VV N135 and 69gr HPBT SMK bullets. I've got some 77gr SMK to play with next.
Finishing load development on 308 for the AR10 using VV 540 and 169gr HPBT SMK bullets. Going to try some Berger 175gr OTM bullets next.

Both guns are giving sub 1/2" 3 shot groups. Will finish this process when both are shooting 1/2 MOA 5 shots groups.

 

[JTKelly]

45acp

 

[Creedmoor]

Loaded 100 256 Winchester Mag this morning, took a Contender and the two new cans to the range for a bit. That Sparrow with CCI Quiet, it pretty darn quiet out of a Walther P22.

 

[Aszerigan]

Loading spicy hot 10mm target rounds to break in a new pistol. If the earth ain't shaking, it isn't true 10mm.

 

[canebreaker]

Sorting casings. 7 buckets of pistol and 8 buckets of rifle casings. I have 1 bucket of pistol casings for today and I'll be finished. Then the resorting begins, 45 auto sp from lp. 40S&W from 10mm. So far I have 3 buckets of 9mm and 1 1/2 buckets of 223/556.

 

[Reale1741]

.577 Snider 600 grain loads. I haven't loaded any of these in years!

 

[VinceU1]

Finishing 200rounds of .44Mag for the nephew and then cranking out some .223Rem Subsonic.

 

[2in1evtime]

200 rounds of 30-30 single stage on these about half done as of now it was break time!

 

[bgcatty]

.243 Winchester for a Model 70 and .30-06 M2 Ball for a M1917 Eddystone.
Much less expensive to reload this ammo than any store bought ammo for sure!

 

[canebreaker]

Decapping 9mm casings before melting them in the furnace.

 

[06ackley]

I'm getting some 6.5x55 swede and 257 roberts brass ready to load. Also need to work on some 30-30