NWI Ingo General Post - Part 3

[repeter1977]

Well, if someone does take over the government, i hope that they know how to do finances at least. If you make 100 dollars, you cannot spend a million, and think things will be ok.

 

[melensdad]

GB, or melensdad, either of you guys coming to the M&S this month?

I wanna take a look at that Burris spotting scope if possible.

I'm planning to attend.

Jedi is bringing me guns and ammo to try. Oh, and he is feeding me too.

Well, if someone does take over the government, i hope that they know how to do finances at least. If you make 100 dollars, you cannot spend a million, and think things will be ok.

My daughter is reading NAKED ECONOMICS for school. I asked her about the book. Her only comment was: Its Keynsian.

 

[tv1217]

Took the loaded chamber indicator out of the 22/45. I was still having problems on Sunday and noticed that the rim strike seemed very light. Disassembled the bolt and cleaned underneath firing pin, it helped a little, still couldn't consistently get through a mag without one or more failure to fires. Some were duds, but many went off after I loaded them and fired again.

But yeah, I read that the LCI could cause it and since it is worthless to me, I figured, why not.


Worst case scenario, it doesn't help and I drop $33 on that volquartsen firing pin and extractor set at Brownell's.

 

[CTC B4Z]

god why do rail road apps take soo freaking long

 

[gunbunnies]

Whats a rail road app ?

 

[lonehoosier]

Whats a rail road app ?

I think he is talking about a job application for the rail road.

 

[melensdad]

I think he is talking about a job application for the rail road.

I figured it was an iPhone/iPad thing

 

[Clif45]

god why do rail road apps take soo freaking long

CSX was the worst...

 

[CTC B4Z]

Worst part with CSX was doing the app, going to interview, being 1 of 4 there and NOT getting the job....

 

[actaeon277]

You should see the paperwork when the .gov is hiring a veteran.
I think the rule is, hire applicant if he/she is still alive at end of process.

 

[Clif45]

I liked my simple test and an interview at my current job. Makes life easy

 

[seeker1321]

Got the last piece of my AR build in tonight. Got everything put together. Still want to get a couple of other parts for it, but it's ready to fire.

 

[gunbunnies]

Lookin good on the AR build...

Oh, on the Railroad app.... my brothers didn't have to fill that stuff out when the CSX and the NS broke up the old Conrail... they just got sucked in...

 

[repeter1977]

Got the last piece of my AR build in tonight. Got everything put together. Still want to get a couple of other parts for it, but it's ready to fire.

Looking great, bet you cant wait to take it out and let'er run.

 

[turnandshoot4]

Ok, now I'm working on getting this NWICE thread going.

 

[t_star]

GB, or melensdad, either of you guys coming to the M&S this month?

I wanna take a look at that Burris spotting scope if possible.

I used Gunbunnies Burris sighting in black label's 50 one day. For not knowing what the eff I was doing, I have to say I like it very much.

 

[turnandshoot4]

Thread up in events section.

 

[lonehoosier]

Only two days left to order your kydex.

Kydex Workshop
When: Sunday October 14, 2012
Where: 46342 (Address will be PM'd to members attending)
Time: 12:00-18:00

You will have to order your own supply's, I will not have enough to go around. I get all of my supply's from Knife Kits. Here is a list of thing you will need to make a holster or mag pouches. You can also make knife sheaths and flashlight holder too.

Chicago Screws - Black Coated - #8 - (.1875 x .250) - 10 Pack
Stock# KKCS-8250-BK-10
SEE: QTY DISCOUNTS
Price: $3.60
Chicago Screws - Black Coated - #8 - (.1875 x .250) - 10 Pack

Eyelets - #8-8 (1/4) - Black Finish - (for .080 KYDEX™/HOLSTEX™) - 100 Pack
Stock# KYSR8-100
SEE: QTY DISCOUNTS
Price: $12.95
Eyelets - #8-8 (1/4) - Black Finish - (for .080 KYDEX™/HOLSTEX™)

KYDEX™ Sheet - Black - (.080)
Stock# KYSHE08
SEE: QTY DISCOUNTS
Price: $5.80
KYDEX™ Sheet - Black - (.080)

Hand Setter Kit - (#8) - (for 1/4 inch sheath rivets)
Stock# HRSK8
Price: $11.99
Hand Setter Kit - (#8) - (for 1/4" sheath rivets)

I do have a hand setter but one more would be nice too have so there is no bottle necks.

Depending how good you are with the kydex you could possibly make 2 holsters with a 12x12 sheet. Make sure you order early so your supply's are in before Sunday. They do have two day shipping.

We will be doing these in my garage. The weather as of now is 60 and rain so dress warm. I do have a heater if it gets to cold so dress in layers.

As for hand tools we should be good. We could use a extra toaster oven and a heat gun depending on the number of people.

I will have to limit this workshop to 10 people.

We can order some pizza if we start to get hunger. You may want to bring some thing to drink.

If you would like to do this and have any questions please PM me with them so we are not tying up the NWI INGO break room. I will do a update on a daily basis.

Attendees
1. Wild Deuce
2.
3.
4.
5.
6.
7.
8.
9.
10.

 

[turnandshoot4]

Ugh. Someone go to this class!

 

[melensdad]

Ugh. Someone go to this class!

I want to. I've been talking to Jay about a pink and purple holster (or two) for Melen. I just can't make it on this date.