Picture of said light?
Look like this one: Hayward SP0583SL200 | Pool & Spa Clearance | Westside Wholesale
It takes two 100 watt 12v T4 G635 halogen bulbs like these: Hayward SP0583SL200 | Pool & Spa Clearance | Westside Wholesale
Picture of said light?
Look like this one: Hayward SP0583SL200 | Pool & Spa Clearance | Westside Wholesale
It takes two 100 watt 12v T4 G635 halogen bulbs like these: Hayward SP0583SL200 | Pool & Spa Clearance | Westside Wholesale
Since when is giving someone a check "paying in cash"? So after the checks are given, a 1099 is issued?
Looking for a motorcycle mechanic to get a 1972 Honda Trail 90 running. It ran about 5 years ago but has been sitting since. Prefer Indianapolis but can take it to one of the surrounding counties.
Need the idler and pitman arms replaced on my 1992 Chevy K1500. I'll buy the parts, but need someone to install them that will be inexpensive and perhaps be willing to make payment arrangements. Live close to Columbus. Needs to be done soon, and will be buying the parts soon. Please PM me. Thanks!
Isn't that an easy job?
I know it requires dropping the gear box. We do not have a level driveway, lifts, or the knowhow to do it.
I inherited a home on the south side of Indy. I'm looking for someone experienced who can install some laminated flooring and also someone who can do a basic bathroom remodel. Any recommendations would be very helpful.
Thanks
Possible job needed: My sister's fiance offered to change my oil not long ago but ended up rounding the oil pan plug to uselessness. Anybody with mechanical experience can help me? Let me know your price...
Are you going to live in it, or rent it ?????I inherited a home on the south side of Indy. I'm looking for someone experienced who can install some laminated flooring and also someone who can do a basic bathroom remodel. Any recommendations would be very helpful.
Thanks
Good vice grips are your friend if you have the clearance... Will just need some muscle to clamp it down tight enough. I have done this on rounded laugh nuts before.
hack saw / dremel across the bolt face and use a flat head screwdriver or equivalent.not enough clearance IIRC...another option?
not enough clearance IIRC...another option?
If you can get a wrench on it I bet you could at least get needle nose vice grips on it. You only need enough clearance to break it loose. Other option is drilling it and using an easy out....
Would baby vice grips work? Hopefully tis guy did not crab it down super tight.
Worse comes to worse if it is easy to pull the pan then that might be a good option.