Originally Posted by shadow6492
Would be interested as well:ingo: or even a full parts lists and where to find the frame material
A good source for many of the parts needed can be found at McMaster-Carr. You can google the name or this link will take you to the catalog page which has the...
I have found MG to be of high and consistent quality. When you buy them by the case, they are reasonably priced. I load 9mm and 357Sig with the 115gr JHP, 40S&W and 10mm with 155gr JHP and 45ACP with 185gr JHP. I have shot 1000s of the .355 and .400 with any issues. I just started reloading the...
'Just curios? Does it have to be a new dryer sheet or can you recycle the ones you have used in the dryer?'
Used sheets cut into strips work just fine. The dryer sheets collect the dust and fine particles. Replace after each load.
"I have found that Longshot powder works very well with full power 10 mm loads. Consult the manufacturer's data. However, I have only used this in a 6 1/2" S&W 610. Not sure of how it would work on the shorter barrel
My bowling pin load is: 9.5 gr. Longshot, 180 gr. Montana Gold jacketed...
I purchased a G20 a couple of months back and really like it. I don't have large hands but have no problem getting a good grip. The ammo is costly and not available everywhere, so I reload to keep costs reasonable and work up a good high power load.
I believe the 17# spring was OK but I purchased the gun used. The OAL length I load to is 1.135 and feeds OK with the 20# Spring. I will try a new 17# factory spring and see if that feeds OK.
Glock onversion Barrel
Sorry, my problem was Failure To Feed not fail to fire. The round failed to consistently chamber with the factory recoil spring. This was fixed by a 20# spring
Glock Conversion Barrels I'm considering getting 357 SIG and 9mm conversion barrels for my G22. I would prefer black (but not always an option) and the 9mm barrel must be threaded. Anyone suggest one brand over another? Storm Lake, KKM, or Lone Wolf are my options. Or Glock OEM...