The CZickness #XIV....It continues

[rkwhyte2]

Ok what did I miss? O rings to dry fire CZ's?
I remeber the dry fire and shooting in double action knowledge but I must have missed o rings.

Place an O ring where the hammer strikes the firing pin and you can pull the trigger as much as you want and it never hits the pin.

This info came from the Wizard.
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each

 

[GregD]

Place an O ring where the hammer strikes the firing pin and you can pull the trigger as much as you want and it never hits the pin.

This info came from the Wizard.
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each

I got mine of 29 cents each at True Value. I'm cheaper!

 

[Trigger Time]

Place an O ring where the hammer strikes the firing pin and you can pull the trigger as much as you want and it never hits the pin.

This info came from the Wizard.
At Menards 7/16 X 5/16, #6 for SP-01 ,97's and 5/16 X 3/16 #36 for 75's PCR, compacts, P-01 because I'm cheap and they are under .60 each

Thank you

 

[rkwhyte2]

I got mine of 29 cents each at True Value. I'm cheaper!

That is a lot cheaper. They were 59 cents at Menards. So how many pulls have you done? BTW this is a great exercise for the weak hand.

 

[mcapo]

I got mine of 29 cents each at True Value. I'm cheaper!

Rubber bands from the kitchen junk drawer....but I think I might upgrade to the O-rings.

 

[GregD]

That is a lot cheaper. They were 59 cents at Menards. So how many pulls have you done? BTW this is a great exercise for the weak hand.

150 so far, a long way to go.

 

[rkwhyte2]

150 so far, a long way to go.

Since the P-01 will be the first one to see the Wizard I'd venture to say the SP-01 will have well north of 2500 DA trigger pulls before it gets to see him.

 

[ChrisK]

I work in a Hydraulic Shop, those size orings cost about 2 to 4 cents each.

 

[T-DOGG]

Where do you put the o-ring on a striker fired?
Asking for a friend.

 

[KJQ6945]

Where do you put the o-ring on a striker fired?
Asking for a friend.

Around the tip of your ***ck.

 

[mcapo]

Around the tip of your ***ck.

I broke all my O-rings based on this advice. Wouldn't fit. Tried it on the .40 and the 9mm G****. Am I missing something?

 

[KJQ6945]

I broke all my O-rings based on this advice. Wouldn't fit. Tried it on the .40 and the 9mm G****. Am I missing something?

I'll buy you some more , due to my bad advice. I read it in Dear Penthouse. Seemed legit.

 

[rkwhyte2]

 

[Trigger Time]

Around the tip of your ***ck.

They have ones that vibrate. I'm just not sure about that with all these batteries I see in the news exploding and catching fire.

 

[doddg]

Hey mcapo, I tried to respond to your post by "Reply With Quote" (the one with the pics of the Shield Performance and the Rami,
but it kept telling me my message (below) was too short and needed at least 1 letter????

1. What you are showing/saying is consistent with what I've heard, in fact I had someone tell me they hated the Rami b/c of its size, and I interpreted that to mean too small to be fun to shoot, and too big for a small CC.
2. The Shield is "perfect" for CC and interesting that you said the 365 was smaller.
3. I'm going to have to rent another 365 b/c I had done so, but don't remember it, probably have notes about it somewhere.
4. But, When I was up in Westfield at Tim's Shooting Academy I had one in my hand and it felt good, but didn't get to fire it.

 

[Trigger Time]

Just dont drop the sig

 

[churchmouse]

Just dont drop the sig

No sigs. NADA

 

[mcapo]

...I had someone tell me they hated the Rami b/c of its size....

Uh no...The Rami is awesome...it is a little thick in the middle which is a challenge for CC compared to the micro-compacts.

You can find a good write up on the P365 from an experienced INGOer here with comparison pictures versus the RAMI and others: https://www.indianagunowners.com/fo...er-p365-depth-review.html?452022=#post7480421

 

[Hoosier45]

No sigs. NADA

I have a few left. Have a nice German p228 that may need to go so I can clear some space. A P320 that my wife likes. And a P230 that is a fun little .380 for those that are recoil sensitive.

 

[mcapo]

No sigs. NADA

Hoosier45 already hurt my feelings over buying a P365...now you?