The Czickness LIII….CZing into the summer with friends near and far.

[mcapo]

Mrs. MCapo: Why is there a gun barrel in my freezer?

Mr. MCapo: Because the fridge isn't cold enough.

Mrs. MCapo: You are an idiot.

 

[gmcttr]

...However, I will give an 11% discount...

Did you start working for Optics Planet?

 

[T-DOGG]

Tisas 9mm Carry
- Klonimus mainspring housing magwell
- Coolhand G10 grips
- Wilson trigger
- EGW firing pin stop/barrel bushing
- Fusion optic plate (RMR pattern)
- Slide cerakoted Tungsten Grey (AllenM)
- Rear sight cut for Fusion Plate with custom rear sight
- flat topped with custom design serrations
- ball cut at front lower slide
- french border
- custom ext mag release

5 factory 10rd mags
673 rounds fired
All work done by me (except cerakote on slide).
Very accurate and a super soft shooter.

$950 with HS407A3 red dot
$800 without red dot
(11% discount available to core members here)

 

[T-DOGG]

Did you start working for Optics Planet?

Menards, except it's an instant rebate. No form or postage stamp needed.

 

[mcapo]

Tisas 9mm Carry
- Klonimus mainspring housing magwell
- Coolhand G10 grips
- Wilson trigger
- EGW firing pin stop/barrel bushing
- Fusion optic plate (RMR pattern)
- Slide cerakoted Tungsten Grey (AllenM)
- Rear sight cut for Fusion Plate with custom rear sight
- flat topped with custom design serrations
- ball cut at front lower slide
- french border
- custom ext mag release

5 factory 10rd mags
673 rounds fired
All work done by me (except cerakote on slide).
Very accurate and a super soft shooter.

$950 with HS407A3 red dot
$800 without red dot
(11% discount available to core members here)

View attachment 364161View attachment 364162

Let me confirm that this work of art is a fantastic shooting gun. I would put it up against anything. A very very very nice gun.

 

[WebSnyper]

So what would it take to convert a shadow 2 compact to SAO? Is the juice worth the squeeze to do so? Would it compare to a gun that was sao from the start?

Looks like these take an adapter plate for any optic as there isn't a "native" fit footprint? and you lose the rear sight when installing an optic?

 

[T-DOGG]

Apologies, one more thing and then I'll get out of here for a bit.

Recently spent some serious time with my DW Valor 9mm VBob and it's the reason I'm allowing myself to sell the Tisas guns.

Bobnosed, lower ballcut, and Kimber Rapide style ports along with my own little extras. Oh and milled it for the DPP red dot.

 

[mcapo]

So what would it take to convert a shadow 2 compact to SAO? Is the juice worth the squeeze to do so? Would it compare to a gun that was sao from the start?

Looks like these take an adapter plate for any optic as there isn't a "native" fit footprint? and you lose the rear sight when installing an optic?

IF CGW can do it, we know someone that can do it better!

CZ Shadow 2 Compact

Upgrade Options CZ Shadow 2 Compact without modifications- $1198.00 CZ Shadow Compact Full Upgrade Kit installed add $435.00 CGW Standard Package $348.50 add a SAO trigger for an additional $42 to make it SAO Package. New firearm purchases without milling or custom refinishing is...

cajungunworks.com

 

[patience0830]

I've decided to buy a motorcycle. Studying this weekend and hoping to get my permit on Monday with a training class with Abate of Indiana in early September.

To help fund this endeavor, I put some stuff in the classifieds the other day and will also be selling a few of my 1911 guns. Offering them here first with a discount, before they hit the classies. Also have an extra HS407A3 red dot that will be for sale and some 9/40/45 brass.

Looking at a cruiser or a more adventurous on/off road enterprise?

Calling @hANNAbONE

 

[Firehawk]

Tisas .45 SS Carry
- bobtailed
- bobnosed
- ballcut at front lower slide
- flat topped and design serrations
- french border
- heavy lower slide bevel
- lightening ports
- rear of slide/frame blended
- EGW barrel bushing/spring plug/extractor
- short trigger
- Ed Brown ext mag release
- Fusion mainspring housing
- Dawson F/O front sight

2 factory mags
2 sets of Coolhand G10 grips
(287 rounds fired thru it)

All work performed by me. Mainspring housing cerakoted black. Barrel bushing and spring plug rust blued. It's really enjoyable and more accurate than you would think.

$900 is what I'll be asking. However, I will give an 11% discount to the core CZicko members. Lurkers need not apply.

*Factory box included in pic as per CZ rules.

View attachment 364154View attachment 364155

I do REALLY like this one. It looks even better in person! But I have family stuff to prioritize right now and new guns are not in the current budget.

 

[T-DOGG]

Looking at a cruiser or a more adventurous on/off road enterprise?

Calling @hANNAbONE

Cruiser. Found a 2006 Honda Shadow local that I'm gonna buy Tuesday. Had been looking at them on Facebook.

 

[jagee]

Cruiser. Found a 2006 Honda Shadow local that I'm gonna buy Tuesday. Had been looking at them on Facebook.

Back when I wanted to upgrade from a 82 Yamaha seca, I was looking at Shadows. Dad surprised me with a Sportster and I've been on HD ever since.

Keep the shiny side up, and have fun!

 

[WebSnyper]

I don't have a P229 SAO. In order to answer your question, I will need to buy one. Be right back with an answer.

Just kidding!!!

Of those four - the S2c is probably the best bang for buck. The DWX is over priced by a bit and compares closer to a 2011 than a SAO Sig or does it?? That being said, If I had to give up the DWX or the P226 SAO; I would give up the DWX first (and then go buy another).

THAT being said, I also spent $$$$ on the P226 SAO to replace springs, hammer and trigger. The DWX is pretty darn nice right of the box. So maybe I would keep the DWX instead. It is really a fantastic combination of the best of a 1911, a CZ and a Sig. IMnsHO,

Darn it. I don't know....but I sure do like my P226 SAO Legion. ALOT!

I guess I need a P229 SAO and CZ S2c now.

Thanks, pal....

I meant to ask. What/if anything has kept you away from an SC2 (assuming you don't have one)?

 

[mcapo]

I meant to ask. What/if anything has kept you away from an SC2 (assuming you don't have one)?

Nothing really except I have a fair number of sa/da guns.

 

[Leadeye]

Picked up the Marlin today and fed it some cast 32-40s. Shot very well and the 1893 SRC has very good feel to it. It's going to need a new ejector spring fitted so I got that on order.

While ammo is scarce 32-40 is one of those lever gun cartridges that shoots consistently well regardless of the rifle or brand.

 

[T-DOGG]

Back when I wanted to upgrade from a 82 Yamaha seca, I was looking at Shadows. Dad surprised me with a Sportster and I've been on HD ever since.

Keep the shiny side up, and have fun!

Went to the local Harley used dealer to look at a Sportser. The guy was bringing it around because he just sold it. Told him I was looking for a first bike. They just took in a very clean 06 Shadow 750 and told me $1500. It was exactly what I wanted. It felt perfect sitting on it. Later sat on a new Honda Rebel 500, a Suzuki Boulevard and a Yamaha Vstar. None of those felt right like the Shadow.

 

[jagee]

Went to the local Harley used dealer to look at a Sportser. The guy was bringing it around because he just sold it. Told him I was looking for a first bike. They just took in a very clean 06 Shadow 750 and told me $1500. It was exactly what I wanted. It felt perfect sitting on it. Later sat on a new Honda Rebel 500, a Suzuki Boulevard and a Yamaha Vstar. None of those felt right like the Shadow.

View attachment 364229

Yeah...just because it's a first bike, doesn't mean it has to be small.

A friend of mine was going to start on a Sportster and work her way up to the Road Glide her late husband rode. She passed the course and just went straight to the RG. She's been on it a few years now doing just fine.

 

[T-DOGG]

Anyone need some brass? All once fired by me. Quantity figured by weight.

9mm
Mixed headstamp
1510 pcs (1027 cleaned, 483 uncleaned)

.45acp
Mixed headstamp
564 pcs (278 cleaned, 286 uncleaned)

.40S&W
Mixed headstamp
75 pcs (some cleaned and some uncleaned)

$70 for all of it
$10 shipping

If I'm way off on price please let me know.

 

[wtburnette]

Morning all...

 

[llh1956]

Good morning, all!