S&W 3rd Gen Semi Autos

[mcapo]

A CS40/10 sold on the SW forum awhile back. Very cool. 10 mm pocket carry.


Ban the fools, not the tools I say. wtburnette

 

[smasherofall]

I decided to do my familly portrait, keeping with my 1 line posts, starting top row: CS45, 457, 2213, 22A-1, and a 659. Not a bad start I guess.

 

[1775usmarine]

I decided to do my familly portrait, keeping with my 1 line posts, starting top row: CS45, 457, 2213, 22A-1, and a 659. Not a bad start I guess.

You got to bump up your game those are rookie numbers. I would like to find a cs45 and cs9 but alas I only get a few choices a year unless i start selling off my CZ's and........ yeah that would be it but that's not happening till I can no longer shoot or I'm dead. I do like the two tone slide release on teh 457 I was thinking of refinishing a black one to use on m build.



At least you're not like the guy in the general thread that's about to/ just get/got banned.

 

[mcapo]

CZ...did some say CZ??!! Send 'em over!

Nice collection!

Do like those 2213's. Need to find something in 22 in this era...

 

[1775usmarine]

CZ...did some say CZ??!! Send 'em over!

Nice collection!

Do like those 2213's. Need to find something in 22 in this era...

I doubt it I have a 75 pre B produced the year I was born 86, an 85 from 2000, a cz52 I re-added since I liked it and shouldn't of listened to my wife when she said she hated it after shooting one I sold 4-5 yrs ago, a cz50, cz70, and a vz2008. After that I get into the 1 or 2 guns from the same maker.

 

[mcapo]

Pre-B - that might be next CZ (unless a RAMI or a 97BD gets in the way).

Bid on a couple 5906's last night. Ended +/- $500 and didn't meet reserves. I generally don't bid on reserve auctions but its been awhile since I've bought a third gen. Withdrawal...

Have a 645 coming up today that is $399 with no reserve but gun funds are low so unless it spectacular or cheap - I'm slowed for awhile (or at least until I get another safe - lol).

 

[smasherofall]

You got to bump up your game those are rookie numbers. I would like to find a cs45 and cs9 but alas I only get a few choices a year unless i start selling off my CZ's and........ yeah that would be it but that's not happening till I can no longer shoot or I'm dead. I do like the two tone slide release on teh 457 I was thinking of refinishing a black one to use on m build.



At least you're not like the guy in the general thread that's about to/ just get/got banned.

I'd prefer a stainless CS45 but I got a great deal on the black one I couldn't pass it up. I lean toward .45's, P90, 45 Shield, 45c, SR1911, XD45 Mod2 (for sale). lol

 

[mcapo]

I'd prefer a stainless CS45 but I got a great deal on the black one I couldn't pass it up. I lean toward .45's, P90, 45 Shield, 45c, SR1911, XD45 Mod2 (for sale). lol

You should pick up the 4506 in the classifieds...

 

[1775usmarine]

I'd prefer a stainless CS45 but I got a great deal on the black one I couldn't pass it up. I lean toward .45's, P90, 45 Shield, 45c, SR1911, XD45 Mod2 (for sale). lol

I had to do a double take on the cs45 as I thought it was another 457. I'm thinking of retiring all my 3rd gens to range pleasure and home defense and start keeping one of my less desirables in the car and for carry.

 

[mcapo]

My CCW rotation has reverted to a Shield/P938 with my center console gun being an M&P 45 (with the worst trigger SW every made BTW). I've considered the P365 to replace both...but our Cessna pilot has me thinking that a cs40/10mm would be a cool change....damn this place is expensive.

OK...back to general...

 

[1775usmarine]

My CCW rotation has reverted to a Shield/P938 with my center console gun being an M&P 45 (with the worst trigger SW every made BTW). I've considered the P365 to replace both...but our Cessna pilot has me thinking that a cs40/10mm would be a cool change....damn this place is expensive.

OK...back to general...

I got my 3913 in the car now with an extra mag, but once I get that pc carbine it will go under my seat since I either carry the G19 or the EC9s and I now have plenty of glock mags to stash in the car........ok commercial is over back to the show over on the general channel.

 

[mcapo]

WTF????? You used the G word in this thread?

Made CM break out in a rash in the CZ thread yesterday...

 

[1775usmarine]

WTF????? You used the G word in this thread?

Made CM break out in a rash in the CZ thread yesterday...

I'm only keeping it now because of the Ruger which I think is better than the other 9mm carbines besides AR builds out there that take glock mags.

 

[mcapo]

Swap it for CZ P10C. I almost bought a Gen5 19 until I stumbled into tdogg's P10C.

Not a Glock hater...just giving you hard time and forgot the purple...

 

[1775usmarine]

Swap it for CZ P10C. I almost bought a Gen5 19 until I stumbled into tdogg's P10C.

Not a Glock hater...just giving you hard time and forgot the purple...

I'm no gun snob except when it comes to my S&W's and CZ's.

 

[mcapo]

I'm no gun snob except when it comes to my S&W's and CZ's.

Umm? Isn't that the definition of a gun snob? Is the general thread wearing off on you?? 42+3=45

 

[1775usmarine]

Umm? Isn't that the definition of a gun snob? Is the general thread wearing off on you?? 42+3=45

My computer is having a hard time keeping up with all the action.

 

[smasherofall]

I'm only keeping it now because of the Ruger which I think is better than the other 9mm carbines besides AR builds out there that take glock mags.

That Ruger looks sweet, only wish they came out sooner before I got a Sub2000 and dumped a couple hundred on all the upgrades.

 

[kscessnadriver]

My CCW rotation has reverted to a Shield/P938 with my center console gun being an M&P 45 (with the worst trigger SW every made BTW). I've considered the P365 to replace both...but our Cessna pilot has me thinking that a cs40/10mm would be a cool change....damn this place is expensive.

OK...back to general...

I started looking more at the thumb decocker guns last night, that could get expensive in a hurry.

 

[1775usmarine]

I know this is probably a long shot but does anyone happen to have a spare side plate assembly or at least the peg that goes through the sear for the bottom of the assembly. The ones on GB all seem to be missing that peg. I ordered a guide rod and spring for the 915 slide the day before yesterday I just need to find a decent slide release and then that peg or a new assembly. I also should be picking up the frame today so may have some new photos of the progress.