S&W 3rd Gen Semi Autos

[1775usmarine]

https://www.gunbroker.com/item/740240351

Here you go mcapo. A very clean 909 with original box and manual.

 

[mcapo]

I probably do need something that is blued in a 3rd gen?

Actually "won" a gunbroker auction for a 4006 (not tsw). Looks to be clean and, of course, has a box AND should arrive with four mags. It will be my first 3rd gen 40 SW. Sort of like a milestone. I may shed a tear...

 

[mcapo]

Might as well put this link here too which includes the PC models. From skjos on the smith-wesson forum.

Somebody can add up what it would cost to have one of each...

http://smith-wessonforum.com/redire...net/sw/3rdgen/3rd%20Gen%20Model%20Numbers.xls

 

[1775usmarine]

I probably do need something that is blued in a 3rd gen?

Actually "won" a gunbroker auction for a 4006 (not tsw). Looks to be clean and, of course, has a box AND should arrive with four mags. It will be my first 3rd gen 40 SW. Sort of like a milestone. I may shed a tear...

With 40 going out of style and 4006's costing what 5906's did a few years back may try to swing a buy later in the year. I do have brass but not looking to start another caliber. I already added 32 acp, 7.62x25 and with the P64 I bought last night 9mm Mak. Luckily I have 3 presses and can do the odd ball calibers on my single stage. I have a square deal set up for 45 and my 450 is currently set for 38/357 since I already have a stock pile of probably 3k 9mm.

 

[mcapo]

Yep. 40 sure has fallen out of favor. Might pick up a stainless CS40 but only if the price is right.

P64? Thought a Ruger PC Carbine was next up? Don't know much about the Makarov's. One of my LGS has a KBI in his case. Looked pretty decent at a glance.

People still reload 45? LOL Yea, my stuff got put away and I need to get everything set back up.

 

[kscessnadriver]

Now that I think about it, I too had seen that chart somewhere, just can't remember where. Thanks for it. I've got a couple TSW guns on my watchlist on gunbroker, as well as a couple limited run guns.

I too have been thinking about a CS40, probably to have to maybe one day convert to 10mm.

 

[mcapo]

Glad to see 40sw going out of style hasn’t lowered prices!!!

Sent from my iPhone using Tapatalk

 

[1775usmarine]

Yep. 40 sure has fallen out of favor. Might pick up a stainless CS40 but only if the price is right.

P64? Thought a Ruger PC Carbine was next up? Don't know much about the Makarov's. One of my LGS has a KBI in his case. Looked pretty decent at a glance.

People still reload 45? LOL Yea, my stuff got put away and I need to get everything set back up.

My Navy Fed credit card which I haven't used in probably 7-10 yrs was about to expire and close out so I had to make a purchase to keep the card and the line open. It was either the P64 or 1k of 7.62x39 and some 9mm defense for the same price. i figured since the 1k is steel the gun will hold its value and maybe one day be like the mosins.

I think I will wait till midyear for the PC to see if there is a recall that comes out.

 

[kscessnadriver]

Glad to see 40sw going out of style hasn’t lowered prices!!!

Sent from my iPhone using Tapatalk

No reason a 4006TSW should cost that. Copper Custom was selling them for like ~$400, IIRC, when I picked one up this summer.

 

[kscessnadriver]

I could afford more of the 3rd gen's, if I'd stop buying 1911's. But when I catch sales at rural king (12% cash back on again), I end up taking something home from there.

 

[PLANEMECH]

Went and did it picked up a used 4006. These Gen 3 are addictive.

 

[mcapo]

Went and did it picked up a used 4006. These Gen 3 are addictive.

Yes, they are! I brought home my first 40 3rd gen yesterday (4006). Same owner has a 3913TSW (mint in box) and a 915 (no box good condition). Thinking about them...

Looking forward to hitting the range with the 4006. Fired yours yet?

 

[1775usmarine]

Yes, they are! I brought home my first 40 3rd gen yesterday (4006). Same owner has a 3913TSW (mint in box) and a 915 (no box good condition). Thinking about them...

Looking forward to hitting the range with the 4006. Fired yours yet?

Whats the 915 going for?

 

[mcapo]

3913TSW is $660 with box and 8 mags. 915 is $340 no box two mags. I am waiting on pics. He describes the TSW as "wicked mint" and the 915 as "really clean"....

 

[PLANEMECH]

No have not shot it yet. Want to see if recoil is less with it being a all metal gun. My other 40's are all polymers. Just love how it feels in the hand.

 

[1775usmarine]

3913TSW is $660 with box and 8 mags. 915 is $340 no box two mags. I am waiting on pics. He describes the TSW as "wicked mint" and the 915 as "really clean"....

I would try 300 for the 915.

 

[mcapo]

$300 of your money or my money? lol

I'm hoping for a little bit of a quantity discount but wanted to see the pics first. If it happens, I'd probably sell the 3913 I have now.

 

[1775usmarine]

$300 of your money or my money? lol

I'm hoping for a little bit of a quantity discount but wanted to see the pics first. If it happens, I'd probably sell the 3913 I have now.

You can get 5906's for 350-400 and the 915 is still a step up from a 910 as far as using metal parts, but I think a good $300 would be average. I would go no higher than 325 if I were buying. and he countered.

 

[mcapo]

Well...they went past my price. Anyone want to predict the final selling price?

Sent from my iPhone using Tapatalk

 

[1775usmarine]

I will venture a guess of 1900