possible cracked trigger bar glock 22

[1nthechmber]

When I look down at my frame in the trigger mechanism the trigger bar tward the back of gun looks cracked....its maybe had 600 rnds through it....the part has a bend in the casting factory,but that casting looks like it is cracking.....gun operates fine......can someone e mail me so I can send a picture?....thanks a lot...Bryan
hondarider350@gmail.com

 

[1nthechmber]

Noooooo body willing to help out? C'mon fellow Hoosiers.

 

[SideArmed]

You should be able to upload the picture to something like photobucket or imgur, then hotlink it in a post.
should look something like this:

Or just use the little image button at the top of the reply box.

 

[1nthechmber]

I don't have enough posts to add a photo iguess.

 

[85t5mcss]

Upload to photobucket and post the link so we can see it.

 

[Jeremy1066]

 

[1nthechmber]

Thanks side armed.....

Jeremy I know right......I will try to figure out photobucket and get back

Sidearmed is helping me though.

 

[1nthechmber]

<a href=http://s1163.photobucket.com/albums/q555/bryankestle/?action=view&current=IMAG0873.jpg target=_blank><img src=http://i1163.photobucket.com/albums/q555/bryankestle/IMAG0873.jpg border=0 alt=></a>

 

[1nthechmber]

http://i1163.photobucket.com/albums/q555/bryankestle/IMAG0872.jpg

 

[1nthechmber]

http://i1163.photobucket.com/albums/q555/bryankestle/IMAG0873.jpg

 

[justjoe]

http://i1163.photobucket.com/albums/q555/bryankestle/IMAG0873.jpg


this is all you need to access the pic

 

[IndyGunworks]

I dont see a crack. are you refering to the casting marks? those can be filed off and polished if you want it to look "clean"

 

[HandK]

Where are you located at! I'm a Certified Glock armorer and have the parts on hand to fix that! It would be no cost to you! as in a free fix, I live 10 miles north of Elkhart, IN.

 

[bronson3304]

its hard to tell from the angle you took the picture. here is what both of mine look like.

 

[bronson3304]

postig pics

I don't have enough posts to add a photo iguess.

go the the INGO info section on the home page. under the frontdesk tab click on fourm support, the third sticky tread down is a tutorial on how to post pics. i use tinypic.com, its easier to use

 

[WebSnyper]

Here's his pics... just use the

and put your URL in the box.

And I concur with Indygunworks... no crack, looks like a casting mark

 

[Davis0023]

When in doubt get a new one. They are not that expensive. Either way have a certified armorer take hands on look, any reasonable gun store should look for free.

 

[IndyGunworks]

When in doubt get a new one. They are not that expensive. Either way have a certified armorer take hands on look, any reasonable gun store should look for free.

Not trying to start a pissing match, but why would you expect that to be free? The store is a business, and they need to turn a profit to stay in business. If you are taking something to them to look at that means that you are using thier knowledge. That would be a service they are providing, and should have the right to charge a FAIR rate for it. why would they be unreasonable if they dont do it for free?

 

[XtremeVel]

I dont see a crack. are you refering to the casting marks? those can be filed off and polished if you want it to look "clean"

Agree ! If those are cracks, then every Glock I own are also cracked...

If that's the first Glock the OP has owned, I can understand how that caught his attention though.

 

[Double T]

If you are super worried, take it apart and see if it is a crack. If it is, replace it.