This is another way to go but you will need a spot welder for the rails and the jigs to bend the flat. I never liked this route because the flats are not heat treated and subject to elongation of the pin holes if shot a lot.You can still find kits for under $200 and if you buy a reciever flat and bend it yourself you can get it for around $50
This is another way to go but you will need a spot welder for the rails and the jigs to bend the flat. I never liked this route because the flats are not heat treated and subject to elongation of the pin holes if shot a lot.
Steve
This is another way to go but you will need a spot welder for the rails and the jigs to bend the flat. I never liked this route because the flats are not heat treated and subject to elongation of the pin holes if shot a lot.
Steve
BUT, you can do the heat treating yourself. Poke around online and you'll find a ton of info. There are some really good how to's if you search a bit.