Have a bcg that will not function. Picks up a round, seems to short chamber it - will not fire. Pull CH back and it will not eject. Have to pop the round out of the bolt with a screwdriver. Is this an extractor/spring problem causing both issues?
Confirmed it is the bcg that is the problem - swapped on to known working rifle with same results and put good bcg in "non-functioning" rifle and it worked just fine.
TIA for suggestions/advise.
Confirmed it is the bcg that is the problem - swapped on to known working rifle with same results and put good bcg in "non-functioning" rifle and it worked just fine.
TIA for suggestions/advise.