AR-15 and M-16 Show And Tell

[manygunsmike]

Cavalry AR15 Lower with another 16" M1S carbine flat top upper assembly .

manygunsmike

 

[MtnBiker6510]

Cavalry AR15 Lower with another 16" M1S carbine flat top upper assembly .

manygunsmike

Looks good! How light is that set-up? Looks pretty light weight.

 

[Sigasaurus]

2nd complete build BCM 12.5"

BCM 12.5" upper, LMT NiB coated BCG, Troy battle rail, Surefire M192 tactical light, Magpul AFG2, Spikes lower, Spikes enhanced LPK, ERGO M93 stock w/strike plate, Magpul gen 2 BUIS, Vortex SPARC w/DD riser, Noveske KX3, vltor low pro gas block, Moe grip, Magpul trigger guard

 

[louielouie]

This is a Spikes Tactical lower receiver
-Rock River Arms parts kit
- NEW UTG butt stock kit
-PSA 20 inch 5.56 NATO FN complete upper
- Target Sports (CDNN Investments) Carry handle/ rear sight

Took me about 4 hours on the lower, but I am very careful to avoid problems. Even with being careful I managed to cross-thread the screw that goes into the buffer tube. Luckily I had the right tap and die to clean up my mess before it became a nightmare.
The bolt screwed right in after the tap and die work.

The upper took me 5 minutes.
I haven't shot my rifle yet; but with a 20 inch hammer forged barrel made by FN and with a 1:7 twist, I am expecting some good groups (after I get it sighted in).

louielouie

This is the rifle I have wanted my whole life. At least since I saw the first ones back in the 60's.

My AR with its stinger attached.

 

[D2VW14_20]

 

[docbach]

http://www.youtube.com/watch?v=KQXzNX0hX44

My LMT Defender 2000 SOPMOD Block II build - CA legal so its neutered a bit.

 

[D2VW14_20]

Got more parts in today! Slowly building!

 

[mvician]

Core 15 Billet Charging Handle (Cerakoted)

 

[jblomenberg16]

Cool...BCM Gunfighter - Fighter there?


BTW, when you gonna have a few of them there new fancy Magpul stocks that are just getting ready to come out?

 

[mvician]

Cool...BCM Gunfighter - Fighter there?


BTW, when you gonna have a few of them there new fancy Magpul stocks that are just getting ready to come out?

Comparison pictures to a BCM GunFighter

I used to have an ACS and really didn't care for it too much and traded it off for another CTR. So.....since the new stocks are pretty much a redesigned ACS I probably won't get one. Unless I see it in person first to decide if I like it

 

[us_agent]

Ooh, daddy likes..

 

[moose01]

A Noveske Infidel upper and Elcan Specter 1-4x that I'm working on a review for. Sitting on a home-built lower...

And an ACOG TA31 ECOS I reviewed, sitting on my CMMG 14.5 middy...

 

[TREETOP]

I posted these in the NFA section but I guess they belong here too:

 

[Bonez87]

Daniel Defense M4

 

[thecolter]

My newly built A4 along with my 16" Carbine

The A4:
CMMG Lower
BCM Upper
BCM BCG
High Standard 20" 1/7 CL Gov. profile barrel
Mostly Colt/USGI lower parts

The Carbine:
DPMS Upper & Lower
Spikes Tactical BCG
Spikes Tactical ST-T2 buffer
PSA 16" Mid-length 1/7 CL barrel
BattleComp 2.0 compensator
Aimpoint Comp M3
Midwest Industries 12" FF Rail
Magpul funiture & MBUS sights

 

[Ljungman]

The AR is a S&W upper with railed gas block, MOE handguards with MOE rail sections, and the foregrip is a Gripods bipod/grip system
The lower is a Surplus arms Multi-cal lower. Cmmg trigger/hammer pack, Mil-Spec tube and buffer assembly with a Mag-Pul ACS stock round out the lower.
The second rifle is an STG 556 MSAR (Steyr AUG clone). The factory optic is no go..so leaning towards Mepro 21 or a 3x ACOG knock off for now.

 

[3point5]

Super awesome picture bro.

 

[jd4320t]

Mine has evolved

 

[Gabriel]

Dennys Guns Billet Lower
Spikes Tactical Nickle Boron fire control group
KNS Gen 2 Anti Rotation Pins
Magpul PRS Stock
Accushot Monopod
Rainer Arms Billet Upper
Daniel Defense 14" Lite Rail
Larue Tactical LT706 Harris BiPod (6-9 BRS)
16" , 1/7 twist, White Oak Armament stainless SPR Barrel
Gas Buster Charging Handle
VLTOR Lo Pro Gas Block
YHM QD Flashider
LaRue Tactical SPR-E optics mount
Primary Arms optic, but will have something nicer soon once I figure out what I want.

Colt 6945

 

[Homebrew]

It's not as cool as some others I've seen here, but here is mine just finished last night:

• CMMG stripped lower
• Stag LPK
• Magpul CTR stock
• PSA 16" carbine length gas system upper
• BCM gunfighter mod4 charging handle
• Magpul hand guard
• Magpul mbus
• Magpul enhanced trigger guard
• Tango Down grip
• Lucid HD7 red dot sight