Dillon XL 650 Primer Pocket Swager Uni Former re Size 223 308 9mm 45 Brass | eBay
I bought one just to try it out. If this works like many are reporting I won't have to upgrade to a 1050 like I was considering. It apparently needs no modification to the press to fit. Takes about 15 minutes to set up. I will report back after I test it out.
***Update***
OK guys, I have run it and can say that it does work. It does not remove near as much of the crimp as the Super swage, but they prime just the same. I don't think that the aftermarket shellplate he sells is necessary either. There isn't that much for pushing up on it. I did a quick google search again before writing a review, and someone on calguns has already done a quick one . Since my experience has been the same I will just give you the link.
http://www.calguns.net/calgunforum/showthread.php?p=12118460
I also want to say that I agree with the comments of the seller in the thread. After running it, there really is no way, that I can see, to damage the press. I just don't see it happening. I was skeptical at first but I do feel 100% confident with this unit not damaging my press. It is just like using the priming station. You get the feel for things and can tell when something isn't right. If I ever do break something b/c of this I'm not going to try and have dillon replace it.
I bought one just to try it out. If this works like many are reporting I won't have to upgrade to a 1050 like I was considering. It apparently needs no modification to the press to fit. Takes about 15 minutes to set up. I will report back after I test it out.
***Update***
OK guys, I have run it and can say that it does work. It does not remove near as much of the crimp as the Super swage, but they prime just the same. I don't think that the aftermarket shellplate he sells is necessary either. There isn't that much for pushing up on it. I did a quick google search again before writing a review, and someone on calguns has already done a quick one . Since my experience has been the same I will just give you the link.
http://www.calguns.net/calgunforum/showthread.php?p=12118460
I also want to say that I agree with the comments of the seller in the thread. After running it, there really is no way, that I can see, to damage the press. I just don't see it happening. I was skeptical at first but I do feel 100% confident with this unit not damaging my press. It is just like using the priming station. You get the feel for things and can tell when something isn't right. If I ever do break something b/c of this I'm not going to try and have dillon replace it.
Last edited: