WASR AK Question

[rightwinger]

I have a wasr GP 10/63 and it has only had around 30rds down the pipe and the main trigger pin that holds the trigger assembly together keeps wobbling out when the trigger is pulled(this is a tapco g2 trigger by the way). Is there an easy fix to this problem or do i need to order a new Tapco g2 trigger thanks

 

[printcraft]

I have a wasr GP 10/63 and it has only had around 30rds down the pipe and the main trigger pin that holds the trigger assembly together keeps wobbling out when the trigger is pulled(this is a tapco g2 trigger by the way). Is there an easy fix to this problem or do i need to order a new Tapco g2 trigger thanks

Your retaining spring in correctly?
More exactly...
It should be above the trigger pin fitted into a grove on the left side of the pin.

 

[printcraft]

A visual to help...

 

[indykid]

Great pictures printcraft!!!

Just to add, there are several different designs to the wire known as a shepherd's hook in some rifles, but they all do the same thing of holding the trigger and hammer axis pin in place.

 

[rightwinger]

thanks printcarft i will check into it when i get off work!

 

[TheWabbit]

This is the part I hate the most of AK internals. The plate is easier.

 

[zing]

This fixed mine as I was having the same problem...goodluck rightwinger and thanks all

 

[spencer rifle]

I had one where the pin was too short and would slip out. Fixed it by refiling the slot held by the spring.

 

[vitamink]

Buy a krebs or similar retainer plate and save yourself the trouble.

 

[chezuki]

AXIS PIN RETAINING PLATE FOR THE SAIGA RIFLES/AK 47

I used this on my Saiga build. Cheap and much less finicky than the stupid spring.

 

[rightwinger]

Fixed the problem thanks again printcraft

 

[IlikeAk's]

I installed a retainer plate last night. I highly recommend one.