I understand the issue with sharing loading data. BUT! Does anyone have or know of a good source for reduced loads for 458 Winchester Mag.
I use Load Data quite a bit and would still like to have more data.
thanks,
How reduced? I have successfully used heavy 45-70 load data in a 458 WIN cartridge for a WAY less violent load. My best solution was trading that safari caliber rifle in on something less punishing. I have not run into a lot of cape buffalo in Indiana.
300 GR. MEI LFP IMR Trail Boss .458" 2.885" 19.0 1187 10,800 CUP 23.0 1282 13,200 CUP
385 GR. CAST LRN IMR Trail Boss .459" 3.000" 16.0 1020 12,100 CUP 19.0 1123 16,100 CUP
405 GR. CAST LFP IMR Trail Boss .458" 2.910" 18.0 1040 14,500 CUP 21.0 1082 17,100 CUP
485 GR. MEI LFP IMR Trail Boss .458" 2.925" 13.0 860 15,500 CUP 19.0 962 22,700 CUP
These will put you under Springfield Trapdoor levels. The 300gr load looks like a good whitetail load.
You can also use H4895 and the 60% rule for youth loads with Hodgdon data.
Thank you very much. I found bullets and brass. Anxious to load some up and have some fun. I did a search and found the Trail Boss data. Looks like it will work great. Thank you,
Trail boss is very forgiving in 45-70 with 400+ grain bullets. I'm sure you will find a mild trail boss load that is considered a "plinker" in your big bore mag
If I'm not mistaken, the same dies do 458. And 45-70... different shell holders. Any 45-70 load should be ok, even loads for the trapdoor Springfield ..those are very pleasant to shoot.
No it is not the one at Fort Branch. Acme Guns in Seymour got this one for me. Great deal too.
As soon as the brassm bullets and dies get here I will be doing some loading.
Yea, I am looking forward to seeing what the loads with Trail Boss can do.