Official NFA pic thread

[jd4320t]

Picture attempt

Colt 6945 had it cerakoted and it's still in jail. I've held it for almost 3 minutes(supervised visitation only). I have a stainless QD phantom that should be here in November, and the gun should be home around February. That's about it. I just wait and stare at the picture!

Cool! What color is that? Who did the coating for you?

 

[JTinIN]

"Old Uggly" (Catco 1919A4 with flat rivets) on a MAG 58 tripod while zeroing sights. 1919A4 at the range photo page

 

[KJQ6945]

Cool! What color is that? Who did the coating for you?

It's FDE, and was done by Chris at Knesek Guns.

The form 3 took a long time so I decided to have it cerakoted during the wait. Not really sure what I think of it yet, but with the black furniture, it doesn't seem so bright. With rail covers and the can on the front I think it will work out. I've got six months for it to grow on me!

 

[TAT7]

"Old Uggly" (Catco 1919A4 with flat rivets) on a MAG 58 tripod while zeroing sights. 1919A4 at the range photo page

Nice!

 

[spyder]

"Old Uggly" (Catco 1919A4 with flat rivets) on a MAG 58 tripod while zeroing sights. 1919A4 at the range photo page

That is not ugly!

 

[JTinIN]

That is not ugly!

- The rivets on the side are flat not rounded.
- The Trunnion has wear / depressions
- Been running a trunnion protector and no more wear
- Next million or two rounds will need a rebuild

Thus since runs great no rush to put in the nearly new chromed trunnion and send out for a rebuild and another set of rivets some winter (or summer if was in the south west ;-), but in the long term plans for the LLC (i.e. maybe not in my lifetime ;-)

Photos at: CACO 1919A4 Trunion Wear and Bench Inspection

 

[KJQ6945]

It's a thing of beauty! I'd rather have a work horse than a show pony.

 

[TAT7]

Here is a pic on the M&P 22 pistol

 

[dudley0]

Here is my two stamp gun.

Spikes ST-22 upper with 5" barrel. PSA lower started as a pistol. Engraved and now sporting a Magpul butt, Tapco vertical grip, single point sling, PA red dot, magpul BUIS, YHM free float and a Huntertown Arms kestrel 22.

Also have a 10.5" barrel 5.56 with a YHM free float, Magpul BUIS, NiB BCG and a Noveske adjustable gas block.

 

[revsaxon]

2 years in the making, but I think the end result was well worth it.

Presenting my sweet lady Kathleen:

Colt SP1 lower, with daniels defense lower parts kit, and KWS anti-rotation pins.
Magpul CTR stock, Hahn Precision Dedicated 9mm Adapter, CMMG bolt, GasBuster charging handle, EoTech 517, Gemtech Talon upper, and a gemtech multimount.

Plus a butt-load of metalform mags :P

 

[g.army]

POF R415 14.5" 223 with YHM SS Suppressor

 

[TheUziButton]

 

[ctbreitwieser]

Finally got my cans, so its time for a group pic.

Top to bottom- M11/9 (fake can for now), SBR with Spikes 10.5" upper and Huntertown Kestrel 556, Ruger 22/45 with Hutertown Guardian 22.

And the same SBR lower with a 4.5" .22 upper and the Kestrel 556., then my P22 with the Guardian 22

I know, I know, horrible pics and the ones upside down, but its the best I could figure out. Either way, I think its not too shabby for a 23 year old.

 

[ctbreitwieser]

Fixed it

 

[KJQ6945]

Very nice toys! Love the look of that 4.5 inch!

 

[kevinj110]

Love the tucked look of the 4.5".

 

[lordt313]

Huntertown Guardian on Mark III Talo

Stoked!

 

[Safes2small]

 

[LLDJR]

Colt LE6920 w/YHM-QD

 

[OneBadV8]

Got my stamp back today