Oddly ended up with some time on my and i haven't posted any pics lately, Just thought I would put some up.
I would love to spend my time just building on 1911's and 2011's. But I also just love working with my tools, and doing a variety of different things. It's nice to mix things up.
Rem 700 install bolt knob, I did this one a little different, usually I lathe the old knob down and thread it while on the lathe but that is rough way to go because of the size and hardness on the knob. So I tried it on the mill with the CNC turning it down. Worked much better.
I did chuck it up in the lathe to find and mark center
You can see how much gets removed from on side. Slow work in the lathe
[video=youtube;lIf44N9Wdu4]https://www.youtube.com/watch?v=lIf44N9Wdu4[/video]
After turning it down thread with a die and done
2
r
Same gun, Shorten the barrel, 11° target crown and thread for suppressor brake
Install Timney Trigger and assemble
I seem to get a lot of requests for RMR cuts, here is a Gen 5 Glock 19 for serrations, RMR, Tall sights and Cerakote.
Made this sldie racker for a CZ 75 dovetail when none that size were availble.
Still have a 2011 or 5 cooking.
10mm
Ready for Hrd Chrome and black oxide
I would love to spend my time just building on 1911's and 2011's. But I also just love working with my tools, and doing a variety of different things. It's nice to mix things up.
Rem 700 install bolt knob, I did this one a little different, usually I lathe the old knob down and thread it while on the lathe but that is rough way to go because of the size and hardness on the knob. So I tried it on the mill with the CNC turning it down. Worked much better.
I did chuck it up in the lathe to find and mark center
You can see how much gets removed from on side. Slow work in the lathe
[video=youtube;lIf44N9Wdu4]https://www.youtube.com/watch?v=lIf44N9Wdu4[/video]
After turning it down thread with a die and done
2
r
Same gun, Shorten the barrel, 11° target crown and thread for suppressor brake
Install Timney Trigger and assemble
I seem to get a lot of requests for RMR cuts, here is a Gen 5 Glock 19 for serrations, RMR, Tall sights and Cerakote.
Made this sldie racker for a CZ 75 dovetail when none that size were availble.
Still have a 2011 or 5 cooking.
10mm
Ready for Hrd Chrome and black oxide