List of Indiana Gunsmiths

[Shortys]

Badger Creek Firearms in Mooresville

 

[DMTJAGER]

I need a gunsmith in or around Logansport, IN. Not a gun butcher, but a real gunsmith. Got a Pre 64 Winchester 94 that needs some work. Any leads appreciated.

I can first hand recommend Mark Penrod from the list. Great smith, competitive shooter and great guy. Hope he is geographically feasible for you.

 

[Kagnew]

Gary Growe in Columbus, Indiana is the best 'smith I've ever dealt with. If Gary can't fix it it can't be fixed.

 

[Dutchisaurus]

Is there a list of gunsmiths who do slide milling? Want to RMR cut an HK slide.

 

[Thomas1969]

NW

Gutridge Inc. (219)922-1711
Griffith, IN
Mon-Fri 10-5 Sat 1-5
Gutridge, Inc. Custom Gunsmithing

Oh sweet! I don’t live far from there but didn’t know about this.

 

[Thomas1969]

Gary Growe in Columbus, Indiana is the best 'smith I've ever dealt with. If Gary can't fix it it can't be fixed.

What business does he work under?

 

[nipprdog]

What business does he work under?

and.........50

 

[Kirk Freeman]

James Robbins
ROBBBINS GUNSMITHING LLC
Dayton, Indiana
(765) 337-3437

jim@robbinsgunsmithing.com

Enthused younger gunsmith. Appointment only (has regular day job and is family man), but has own shop on property. Machining does not appear to be problem.

 

[gregr]

I had nick @ Nalco Gunsmithing thread a barrel for me. He did a great job and fast turn around!

Just a heads up on Nalco Gunsmithing. I just spoke to Nick on the phone. Plenty nice enough guy, but...

All I need is a scope put back in the rings, which are already in place on my rifle, the scope set for my specific eye relief, and the scope boresighted. So I contacted Nick and asked about that. Yup, he will do that for $100. I said HUH? He said his minimum is an hours billing, and that`s $100/hr. I said that his website says a scope mounted and boresighted is $40, and he said that website was done 4 years ago, and the guy who did the website has moved on, and he doesn`t deal with the website. Sooooo, needless to say, I`m moving on, I`m not going to cough up $100 to get a scope put in the rings and boresighted. This just an fyi, so you don`t waste your time, or Nick`s time I suppose.
SMH.

 

[Joniki]

My long time gunsmith died a few years ago. Now I find myself needing some work done. Any good gunsmiths in the Kendallville northeast Indiana area?

 

[Bassat]

I have no idea of exactly what he does, or the quality of his work, but he does advertise Gun Smithing Services

Belcher's Guns
13398 McKinley Hiway
Mishawaka, IN 46545
574.703.3811

Belchers Frontpage – Belchers Guns and Gunsmithing

Read More →

belchersgunsmithing.com

 

[Judamonster]

Just a heads up on Nalco Gunsmithing. I just spoke to Nick on the phone. Plenty nice enough guy, but...

All I need is a scope put back in the rings, which are already in place on my rifle, the scope set for my specific eye relief, and the scope boresighted. So I contacted Nick and asked about that. Yup, he will do that for $100. I said HUH? He said his minimum is an hours billing, and that`s $100/hr. I said that his website says a scope mounted and boresighted is $40, and he said that website was done 4 years ago, and the guy who did the website has moved on, and he doesn`t deal with the website. Sooooo, needless to say, I`m moving on, I`m not going to cough up $100 to get a scope put in the rings and boresighted. This just an fyi, so you don`t waste your time, or Nick`s time I suppose.
SMH.

What is the benefit of having a gunsmith install an optic? I have done it myself to this point but and starting to wonder if there is more to it than I think there is.

 

[repeter1977]

What is the benefit of having a gunsmith install an optic? I have done it myself to this point but and starting to wonder if there is more to it than I think there is.

Making sure it's leveled properly, and bore sighted.
At least I think that's why

 

[jayhawk]

Can anyone give me a recommendation for stock work on a CZ in the general Fort Wayne area? I have a 527 that I'd like to get bedded. I called TM Stockworks, but he won't work on CZs.

 

[Max Volume]

FYI,

Gutridge in Griffith has been closed for some time and the shop is something else now. I heard he passed away.

 

[FrankFaFa]

Nick from Nalco Gunsmithing (if that's the guy near Lebanon) is a hack! He dinged up a non-fluted cylinder on a new S&W 686 Plus putting on a high vis front sight. The sight even had daylight between it and the barrel.

Charged me $80 and when I tried to use my credit card, he quickly advised me there would be a 3% upcharge. Luckily, I had cash.

Yeh Nick, if you're reading this, I didn't forget a thing. Look up your records and find the transaction. It was either December of 2017 or January of 2018.

998

 

[GuyRelford]

If it hasn't been posted already, please know that Pinnacle Firearms in Carmel has an excellent gunsmith (Ethan) who is on-premises full time. Ethan has done great work for me on several occasions (and doesn't make fun of me when I ask him to fix a problem that I caused). Check him out at 598 W. Carmel Drive in Carmel or pinnacle-firearms.com.

Guy

 

[GuyRelford]

Nick from Nalco Gunsmithing (if that's the guy near Lebanon) is a hack! He dinged up a non-fluted cylinder on a new S&W 686 Plus putting on a high vis front sight. The sight even had daylight between it and the barrel.

Charged me $80 and when I tried to use my credit card, he quickly advised me there would be a 3% upcharge. Luckily, I had cash.

Yeh Nick, if you're reading this, I didn't forget a thing. Look up your records and find the transaction. It was either December of 2017 or January of 2018.

998

I'm sorry you had a bad experience, but Nick has done OUTSTANDING work for me on several occasions. He has expertly milled the slide on a very expensive (Ed Brown) 1911 and he's helped me build multiple SBRs and SBSs that required much more than the assembly of parts (recrowning and rethreading muzzles and much more). I would trust Nick with any gunsmithing project I ever have - and I have sent dozens of referrals to him without a single complaint.

Guy

 

[Kirk Freeman]

If it hasn't been posted already, please know that Pinnacle Firearms in Carmel has an excellent gunsmith (Ethan) who is on-premises full time. Ethan has done great work for me on several occasions (and doesn't make fun of me when I ask him to fix a problem that I caused). Check him out at 598 W. Carmel Drive in Carmel or pinnacle-firearms.com.

Guy

Can recommend Pinnacle Gunsmithing Services. Did great work on one of my Shhhhteyr AUGs. That factory trigger is just awful, much better now.

 

[sairax]

I did a search through the forums and this is what I found so far. I'll try to keep it updated. I know there are a lot more out there, so reply and I'll add them or if you have corrections or updates for the current list let me know. I know there are always inquiries so thought it would be nice to get a list going.

Northern Indiana

Delmar R Mounts III (219) 669-9044
D & D Weapon Works
1221 S. Halleck St.
Demotte, Indiana 46310

Gutridge Inc. (219) 922-1711
Griffith, IN
Mon-Fri 10-5 Sat 1-5
Gutridge, Inc. Custom Gunsmithing

Jerry Johnson (260) 693-1902
Churubusco, IN

Jims guns (574)722-7210
Logansport, IN

LJ'S gunsmithing,LLC (574) 831-6381
longgun/handgun cleaning and repair
call for appointment

Lockwerks (574) 936-3764
Gunsmithing, training, custom ARs
charlieranger@lockwerks.us
appointment only

Mark Penrod (260) 982-8385
Penrod Precision
312 College Ave
N Manchester, IN 46962

Michael Burrage (260) 927-9379
333 W 11Th St
Auburn, IN 46706

Neil Keller (260) 724-3065
1684E 900 N
Decatur, IN 46733
Kustom Ballistics

Robert Johns (219) 253-8555
3805 E 900 N
Monon, IN 47959-8272
shogun@urhere.net

Tim's Gun Shop (574) 293-4127
61531 State Road 19
FFL Class 1 Gunsmith
Appointment only

Tom Meredith (260) 485-5389
TM Stockworks
6355 Maplecrest Road
Fort Wayne, Indiana 46835

Central Indiana

AllenM - https://www.indianagunowners.com/forums/members/allenm.html
Diamond Collision
Cerakote, barrel threading, 1911s, etc.

Andy (INGO: huawilso) (765) 465-1618
New Castle, IN

Brookston Sport Shop (765) 563-6121
313 E. 3rd. St.
Brookston, Indiana 47923

Darrel's Custom Firearms (765) 492-3939
Cayuga

Gary Nebel (765) 763-6896
Cor Of King & Mulberry St
Gwynneville, IN 46144

Chris Conlon (317) 491-2905
KRC Refinishing
Avon, Indiana
m1903a3@krcrefinishing.com
Home

Mark Highsmith (317) 861-6900
Highsmith Guns
New Palestine, IN
every wednesday 1-4p in Beech Grove Firearms (317) 791-2725

MyGlockDoc.com (317) 445-5937
1075 Broad Ripple Avenue, Suite 203
Indianapolis, IN 46220
nick@myglockdoc.com

Nash Gunwerx
cory@stippledgrip.com

Paris & Paris Gunsmithing (765) 258-3699
2566 E.600 N.
Frankfort ,In

Paul Vondrasek (765) 564-4321
Diamond V Outdoor Sports
602 W Main Street
Delphi, IN 46923
Gunsmithing

Ralph Doyle (765) 934-4855
304 S 4Th St
Van Buren, IN 46991

Ray Saltzman (765) 675-2040
Saltzman Gun Works
3896 S 400 W
Tipton, IN 46072

Richard Marks (317) 462-1585
108 Ellis Dr
Greenfield, IN 46140-1321

Steve Snyder (765) 563-6121
Brookston, IN

Stu Grell (765) 572-2207
Grell'S Gunsmithing
2220 E 1400 N
Attica, IN 47918

Wiegands Gun Service (765) 795-4293
Cloverdale, IN 46120

William Brooks (765) 521-8133
47 Midway Dr 43 miles
New Castle, IN 47362-1227
joduss@comcast.net

Verne Trester - (317) 908-0784
Firearms and Ballistics Expert Witness Testimony
Centerville, Indiana
Verne Trester, Firearms and ballistics expert witness testimony
vt@firearmexpertwitness.com

Southern Indiana

Alan Brown (812) 384-1056
A.J. Brown Arms Co.
709 North Washington St.
Bloomfield, IN 47424-1043

Brian Cosby (812) 925-6761
111 W Lincoln Ave
Chandler, IN 47610-9560

Bruce Williams (812) 584-8061
256 Probasco St
Lawrenceburg, IN 47025
sittingduckgunsmith@hotmail.com

Chucks Gun Repair (812) 339-1416
106 Ridgeview Dr.
Bloomington, IN 47401

Geoff Corn (812) 749-6416
Match Armorer's Shop
RR#3, Box 66-A
Oakland City, IN 47660

Harry Stoll (812) 401-0226
2916 Covert Ave Ste D
Evansville, IN 47714-4004

O'Fishel Gunworks (812) 821-1161
9405 Smith Rd
Gosport, IN 47433

Robert Jones (812) 392-2265
6650 N State Highway 7
Scipio, IN 47273-9448
rdjgunsmith@msn.com

Great list! I wonder... is there a future of gunsmithing in 3d materials?