Tag for interest. Anyone using titegroup for a 200 gr. lead SWC?
WST is awesome for light target loads in .45acp. Just search for loads using Winchester Super Target
titegroup smokes a lot with lead. PowerPistol smokes a bit and makes a lot of flash....dirty as **** if not loaded hot. w231 is ok.. WST is the best
Tag for interest. Anyone using titegroup for a 200 gr. lead SWC?
My Two light loads with 200 grain Lead Semi wadcutters are as follows: 4.0 Gr Clays or 4.2 gr TiteGroup, both loaded to 1.260" OAL
I use it in the full sized 1911, the Officers model and the 625 revolver, with good accuracy and function.
Good Luck
i have been using Promo(Red Dot load data) with 200gr LSWC 4.0gr runnin' about 740fps.....very little smoke and very accurate out of these.....
i have been using Promo(Red Dot load data) with 200gr LSWC 4.0gr runnin' about 740fps.....very little smoke and very accurate out of these.....