What's not to like?
I should mention that I ended up making a minor mod to the trigger. I haven't had to do it to a Glock in years but the trigger safety on the older guns didn't depress fully and lay flush with the face of the trigger. The 42 trigger was the same so I took the trigger bar out, depressed the trigger safety fully and filed the excess off so it sits flush when the trigger is pressed. That'll eliminate the little bit of irritation I had after shooting 250 rounds through it.
Appendix carry is my preferred method for CC and small handguns. I have a difficult time keeping anything else from printing.
Every new Glock I've examined seems to have that issue and I've made the same mod on every one I own and most of the ones I work on if requested.. If you are just shooting a few rounds it's not a problem but after a couple hundred pulling a trigger that, in essence, is 3/32 wide can get a little irritating..I should mention that I ended up making a minor mod to the trigger. I haven't had to do it to a Glock in years but the trigger safety on the older guns didn't depress fully and lay flush with the face of the trigger. The 42 trigger was the same so I took the trigger bar out, depressed the trigger safety fully and filed the excess off so it sits flush when the trigger is pressed. That'll eliminate the little bit of irritation I had after shooting 250 rounds through it.