F90 Atrax Bullpup from Lithgow

[Prometheus]

Oh man, I had a blast this week down at the Big 3, for those who asked, I made it home safely a got a flight out just before they shut down MCO, thank you for your concern.

One of the things to catch my eye first was the F90 from Lithgow. It was like the first time I got a Tavor in my hands... I have to have one.

These models were select fire and handled and shot very well. I didn't see a single malfunction on either of them all day and they worked with both the older styer mags and the newer AUS pmags.

I'll be looking forward to doing a full review on these once they come out of production.

[video=youtube;OyNslDffgfE]https://www.youtube.com/watch?v=OyNslDffgfE[/video]

 

[Rookie]

Can it be switched for lefties?

 

[Prometheus]

Can it be switched for lefties?

Due to the impending hurricane I didn't get quite as much time with it as I would have liked but there was a port cover where the left hand ejection could occur. I'll try and find out how easily it will be to switch from right to left hand ejection.

 

[TheBoss930]

Subbed

 

[snowman]

I hate to ask, but did they say how much the civilian version will cost?

 

[Prometheus]

Subbed

Thank you!

I hate to ask, but did they say how much the civilian version will cost?

They are shooting for an MSRP of $1,999.

 

[Kirk Freeman]

How are they getting Form 6s signed and getting them into the country?

Are they importing under a "sporterized" config and then switching out at the importer's?

 

[M67]

Not much into bullpups, but those are kinda neat

 

[Prometheus]

How are they getting Form 6s signed and getting them into the country?

Are they importing under a "sporterized" config and then switching out at the importer's?

Lithgow is opening / has a factory in the USA, it's my understanding that some parts will be shipped in from AUS but the build and assembly to ensure 922r compliance will be done here in CONUS. From what Lithgow told me it sounds like they are planning on setting up shop here like IWI has done. They are fully committed on this project.

 

[Kirk Freeman]

Lithgow is opening / has a factory in the USA, it's my understanding that some parts will be shipped in from AUS but the build and assembly to ensure 922r compliance will be done here in CONUS. From what Lithgow told me it sounds like they are planning on setting up shop here like IWI has done. They are fully committed on this project.

Interesting. Where is it (the factory), Prom?

They would not answer questions in Louisville at NRAAM (well, from me, but I was just some putz in a coat and tie, no camera).

 

[Prometheus]

Interesting. Where is it (the factory), Prom?

They would not answer questions in Louisville at NRAAM (well, from me, but I was just some putz in a coat and tie, no camera).

I didn't ask. I'll reach out to my contact when I get a chance and ask him where they are setting up shop.

 

[Kirk Freeman]

I didn't ask. I'll reach out to my contact when I get a chance and ask him where they are setting up shop.

We are fed such a steady diet of BS and lies in the gun culture that when I hear "real soon", "going to release", "X, Y or Z is going to", or "building a factory (but don't tell us where)", which even if true, always make my ears itch.

 

[Prometheus]

We are fed such a steady diet of BS and lies in the gun culture that when I hear "real soon", "going to release", "X, Y or Z is going to", or "building a factory (but don't tell us where)", which even if true, always make my ears itch.

#Truth

To answer your question the location is Deluth, GA and it's "in motion".

 

[Kirk Freeman]

Ah, Duluth (40 minutes outside Atlanta). They will have plenty of company down there.

Glock is at the 11. Duluth is further out at the 2.