Repost because I'm a dummy who forgot my pictures. Stay in school, kids...
Jumped into the hobby real hard, ultimately found I didn't have time for it. This is a big lot of quadcopter parts, enough to make 1.5 quads!
Included:
* 2x Tarot TL250A Carbon Fiber Frame
* 1x OpenPilot CC3D Flight Controller
* 8x DYS BE1806 Brushless Motor
* 4x Full Set (4x, 16 props total) Gemfan 6045 Nylon Propellers (Orange/Black)
* 4x HobbyKing 20A BlueSeries ESC
* 1x HobbyKing BlueSeries programming card
* 2x Eachine 700TVL CCD Camera for FPV
* 2x Eachine ET200 VTX Video Transmitter
* 1x Boscam Cloud Spirit antenna pair (Tx/Rx)
* 2x CC3D Power Distribution Board
* 1x Turnigy E3 Compact Lipoly Charger
* 3x Turnigy 2200 mAh 3S 30C Lipoly Batteries
* 1x Turnigy 1700 mAh 2S 20C Lipoly Battery
* 1x SkyZone RC832 Video Receiver
As you can see, there's a lot of stuff here. I'm not interested in parting it out. It all has to go. But, it's a great load of parts for getting into the hobby, and the inclusion of a second frame makes it really worry-free when it comes time for your first crash
The frame is partially assembled, including 4 motors mounted with some leads trimmed and bullet connectors (included) attached. All included hardware, boxes, and manuals will be included.
I've got about $375 into this. I'm looking to get $260 out, or best offer. Not considering trades at this time.
Location: Butler University/Indianapolis Northside
Price: [strike]$260[/strike] $200 OBO
Photos:
(Image includes most, but not all, parts included.)
Jumped into the hobby real hard, ultimately found I didn't have time for it. This is a big lot of quadcopter parts, enough to make 1.5 quads!
Included:
* 2x Tarot TL250A Carbon Fiber Frame
* 1x OpenPilot CC3D Flight Controller
* 8x DYS BE1806 Brushless Motor
* 4x Full Set (4x, 16 props total) Gemfan 6045 Nylon Propellers (Orange/Black)
* 4x HobbyKing 20A BlueSeries ESC
* 1x HobbyKing BlueSeries programming card
* 2x Eachine 700TVL CCD Camera for FPV
* 2x Eachine ET200 VTX Video Transmitter
* 1x Boscam Cloud Spirit antenna pair (Tx/Rx)
* 2x CC3D Power Distribution Board
* 1x Turnigy E3 Compact Lipoly Charger
* 3x Turnigy 2200 mAh 3S 30C Lipoly Batteries
* 1x Turnigy 1700 mAh 2S 20C Lipoly Battery
* 1x SkyZone RC832 Video Receiver
As you can see, there's a lot of stuff here. I'm not interested in parting it out. It all has to go. But, it's a great load of parts for getting into the hobby, and the inclusion of a second frame makes it really worry-free when it comes time for your first crash
The frame is partially assembled, including 4 motors mounted with some leads trimmed and bullet connectors (included) attached. All included hardware, boxes, and manuals will be included.
I've got about $375 into this. I'm looking to get $260 out, or best offer. Not considering trades at this time.
Location: Butler University/Indianapolis Northside
Price: [strike]$260[/strike] $200 OBO
Photos:
(Image includes most, but not all, parts included.)
Last edited: