Centurion forged upper/lower
BCM MCMR 13" rail
Criterion 14.5" core midlength barrel
Surefire Warcomp
Vltor A5 RE w/ A5H2 buffer
Springco green buffer spring
Magpul SL-S stock
BCM pistol grip
BCM gas block
BCM BCG
V Seven titanium KMR/MCMR barrel nut
V Seven titanium KMR/MCMR rail clamps
KAC micro flip irons
SCALAR LEAP 1.93 mount
Trijicon MRO red dot
Magpul extended mag release
BAD take town/pivot pins
Melonite gas tube (unk brand, Rainier I believe)
Raptor SL charging handle
LaRue MBT-2S trigger
FCD ASF-90
FCD ABC/R V3
FCD ESF-H1
FCD CNF
FCD TGF
FCD ECP
FCD EMR-A
FCD LDFA
All roll pins/springs sourced from FCD. Warcomp was pinned by d.wilson. Feed ramps were also polished by d.wilson. Barrel is bedded with 620 loctite. Correct Aeroshell grease was used. Castle nut is staked. Torque values all correct. Around 1500-2000 rounds through it from a few carbine courses. Runs flawlessly. Lower is the first run of lowers Centurion made. Serial is under 200. Does have some machining in the take town pin channel (pictured); which was common in the first batch of these lowers. That does not affect functioning. Very rare. Close to 3k in parts. Price is 2200 OBO.
I will also throw in a FCD two point sling w/magpul qd's and Rail Scales mlok qd as well as an Arisaka mlok scout mount.
I am not looking to part out but I will sell lower complete and upper complete.
Complete upper w/ sights and scales - $1100
Compete lower - $550
Optic w/ mount -SOLD
BCM MCMR 13" rail
Criterion 14.5" core midlength barrel
Surefire Warcomp
Vltor A5 RE w/ A5H2 buffer
Springco green buffer spring
Magpul SL-S stock
BCM pistol grip
BCM gas block
BCM BCG
V Seven titanium KMR/MCMR barrel nut
V Seven titanium KMR/MCMR rail clamps
KAC micro flip irons
SCALAR LEAP 1.93 mount
Trijicon MRO red dot
Magpul extended mag release
BAD take town/pivot pins
Melonite gas tube (unk brand, Rainier I believe)
Raptor SL charging handle
LaRue MBT-2S trigger
FCD ASF-90
FCD ABC/R V3
FCD ESF-H1
FCD CNF
FCD TGF
FCD ECP
FCD EMR-A
FCD LDFA
All roll pins/springs sourced from FCD. Warcomp was pinned by d.wilson. Feed ramps were also polished by d.wilson. Barrel is bedded with 620 loctite. Correct Aeroshell grease was used. Castle nut is staked. Torque values all correct. Around 1500-2000 rounds through it from a few carbine courses. Runs flawlessly. Lower is the first run of lowers Centurion made. Serial is under 200. Does have some machining in the take town pin channel (pictured); which was common in the first batch of these lowers. That does not affect functioning. Very rare. Close to 3k in parts. Price is 2200 OBO.
I will also throw in a FCD two point sling w/magpul qd's and Rail Scales mlok qd as well as an Arisaka mlok scout mount.
I am not looking to part out but I will sell lower complete and upper complete.
Complete upper w/ sights and scales - $1100
Compete lower - $550
Optic w/ mount -SOLD
Attachments
Last edited: