I had to finally put the thing on the bottom shelf. I've 'zeroed' the scale according to the directions and discovered it's crap or I just cannot use it properly. I load at the minimum grain weights and it just seemed like my rounds produced much more recoil than those I produced at Andrew's class. So, I zeroed the scale again and produced more rounds, but with the same result.
I just got an electronic scale and discovered my measurements on the Lee scale have been high! I produced a 4.5 grain load and it was actually 5.1 grains! No, it wasn't a 'hot load,' but still outside the limit I was desiring to produce. I've ditched the Lee scale and believe my recoil should be much softer, which is my desire.
Maybe I'm the only one who has had this issue, but just in case, check your loads to be sure.
I just got an electronic scale and discovered my measurements on the Lee scale have been high! I produced a 4.5 grain load and it was actually 5.1 grains! No, it wasn't a 'hot load,' but still outside the limit I was desiring to produce. I've ditched the Lee scale and believe my recoil should be much softer, which is my desire.
Maybe I'm the only one who has had this issue, but just in case, check your loads to be sure.