Hey, The rifle was a Winchester 67! Thanks so much for telling me that model # because I had no idea what that rifle was called. I'm going to look for one on gunbroker now. Thanks again!
Hi Sasquatcher, The scope & mount came from the same co. but I got it at a local gun show.
There from Aimsportsinc.com
Mount SKU: MNG
Scope SKU: JH2732B
The scope cost about $60 & the mount was $15.
The only thing I had a problem with the mount, but it is a easy fix.
The screws that go in the sides of the mount are too small. If you get them tight enough to hold the shock from the recoil of the gun the screws will strip out the aluminum mount.
So what I did to cure the problem was to drill through the screw holes in the mount with 1/8 drill & use the original cross pin from the rear sight. Just slip it through the sight base and the mount, tighten up the set screws, mount the scope, and I was ready to go.
It shoots good patterns at 100yds I have been thinking of using it on coyotes or deer down in KY.