Hello fellow Ingo'ers! What we have here is some Grade A choice 3/8" AR500!!
This is the same stuff that made an appearance at both the SKS and Long Range shoots this past weekend. I decided to run some more targets and even got a few full sized IPSC targets into the mix.
I have plenty of 12", 8", and 4" targets, but only 3 of the IPSC torsos.
PM for pricing
Targets are HyDef plasma cut from prime 3/8" Pickle and Oiled AR500 (not scrap). HyDef plasma keeps most of the heat in the material that is cut away, thus leaving the mechanical properties of the remaining part minimally altered. Each target has a set of oversized 1/2" mounting holes perfect for using 1/2" bolts and suspending from a chain. It is not recommended to shoot at steel at less than 15 yrds with handgun calibers and 100 yrds with rifle cartridges.
Here are some shoots of the steel in action this past weekend:
At the SKS shoot.
These were a bit inside the recommended distance, but a good testament to the durability of the steel. On the left is the AR500 and on the right is some mild steel. The mild steel was actually 15 yrds or so further away than the AR500.
Here is some action from the Long Range shoot (Nice shooting Nick and soon to be Mrs. Nick!)
As you can see, these targets can be painted with the color of your choice. As the paint is shot off, simply apply a new coat and you have a brand spanking new reactive target!
Did someone say Torsos?
The prices listed above are for a FTF meet. I will be at the 1500 this weekend, at least on Saturday, maybe Sunday.
The smaller targets will fit in flat rate USPS boxes as another option. Prices to ship will range from $5 to $15 per box. PM me for a shipping quote.
This is the same stuff that made an appearance at both the SKS and Long Range shoots this past weekend. I decided to run some more targets and even got a few full sized IPSC targets into the mix.
I have plenty of 12", 8", and 4" targets, but only 3 of the IPSC torsos.
PM for pricing
Targets are HyDef plasma cut from prime 3/8" Pickle and Oiled AR500 (not scrap). HyDef plasma keeps most of the heat in the material that is cut away, thus leaving the mechanical properties of the remaining part minimally altered. Each target has a set of oversized 1/2" mounting holes perfect for using 1/2" bolts and suspending from a chain. It is not recommended to shoot at steel at less than 15 yrds with handgun calibers and 100 yrds with rifle cartridges.
Here are some shoots of the steel in action this past weekend:
At the SKS shoot.
These were a bit inside the recommended distance, but a good testament to the durability of the steel. On the left is the AR500 and on the right is some mild steel. The mild steel was actually 15 yrds or so further away than the AR500.
Here is some action from the Long Range shoot (Nice shooting Nick and soon to be Mrs. Nick!)
As you can see, these targets can be painted with the color of your choice. As the paint is shot off, simply apply a new coat and you have a brand spanking new reactive target!
Did someone say Torsos?
The prices listed above are for a FTF meet. I will be at the 1500 this weekend, at least on Saturday, maybe Sunday.
The smaller targets will fit in flat rate USPS boxes as another option. Prices to ship will range from $5 to $15 per box. PM me for a shipping quote.
Last edited: