WTS/T: Springfield EMP 9mm w/ night sights

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Status
    Please reply by conversation.

    Indy_Guy_77

    Grandmaster
    Rating - 100%
    16   0   0
    Apr 30, 2008
    16,576
    48
    EMPkit.jpg


    Picture032.jpg


    3.jpg


    2.jpg


    11.jpg

    Shown with a Kahr CW-40 for comparison

    rearfit.jpg


    rearfit2.jpg

    Check out that slide-to-frame fit!!!!

    boogeredarea.jpg

    Boogered up area ahead of the plunger tube, the ONLY flaw on this pistol

    controls.jpg


    9.jpg


    7.jpg

    Worried about accuracy from such a short barrel?? Don't be! This pistol is much more accurate than I am. (these plates were shot off hand, but I was leaning against a 4x4 post.)

    MUCH prefer Face-to-Face transaction in Indy or surrounding areas, but will ship from FFL to FFL for $20. (A friend of mine at work is an FFL and can do this very easily for me)

    $950 (CASH or Cashier's Check if I'm shipping it) will get you:

    -An almost-like-new-in-box Springfield Enhanced Micro Pistol in 9mm (to my untrained eye, I'd rate this at 98-ish %)
    -4 factory magazines (1 extra = $30)
    -kit-included belt holster and double mag pouch, cleaning brush, and baggy of goodies (allen wrench, chamber flag, internal lock key, and spring compression clip needed to field strip the pistol)
    -factory included night sites
    -factory slimline cobobolo wood grips
    -aftermarket Monkey Grips (By Lazza, $60)

    This thing is accurate, accurate, accurate! You'll NOT be disappointed

    As some of you may know from previous posts, I have had trouble with this pistol. However, it has just returned from the factory with:

    NEW SLIDE
    NEW Firing Pin
    mirror-polished feed ramp
    tuned extractor
    reamed barrel
    barrel fitted to new slide

    After receiving it back from Springfield, myself and 3 friends put roughly 200 rounds of FMJ through it without a hitch. ZERO evidence of previous problem. Springfield stands by their work, and so do I.

    I would absolutely trust my life to this firearm if I were to carry it.

    I'm selling it, however, to fund another desire.

    There is a small area of finish boogering, just ahead of the plunger tube, caused by the slide stop during reinstallation. It was there when I bought it and hasn't gotten any better since.

    Stats from Springfield:

    Caliber: 9 x 19mm.
    Magazines: 4 - 9 Round, Stainless Steel with Slam Pad.
    Sights: Fixed tritium low profile combat.
    Trigger: Long Aluminum Match Grade, 5 - 6 lbs.
    Frame: Forged Aluminum Alloy, Black Hardcoat Anodized.
    Recoil System: Dual Spring, Full Length Guide Rod.
    Length: 6.5”.
    Height: 5”.
    Weight w/ Empty Magazine: 26 ozs.
    Slide : Forged Stainless Steel, Satin Finish.
    Barrel: 3” Stainless Steel Match Grade, Fully Supported Ramp, Bull.
    Grips: Thinline Cocobolo Hardwood.
    The new Springfield Armory 9mm Enhanced Micro Pistol (EMP) is the first production 1911 made from the ground up to shoot short cartridges.

    Ingunowners forum members AllenM and Epsylum have both handled/seen this pistol. I believe Epsylum has even sent a few bullets down range.

    Please ask me any questions you have.

    -J-
     
    Last edited:

    Indy_Guy_77

    Grandmaster
    Rating - 100%
    16   0   0
    Apr 30, 2008
    16,576
    48
    Due to the overwhelming number of people asking, I feel the need to add this post in response.

    At this time, I'm only looking to trade for an H&K P7M8 in like condition. Otherwise, I'd rather sell it out right so that I may take my time researching my next purchase.

    Thank you to all those who've dropped me notes to inquire.

    -J-
     

    Indy_Guy_77

    Grandmaster
    Rating - 100%
    16   0   0
    Apr 30, 2008
    16,576
    48
    Bump:

    Still would rather be FTF transfer in the Indy area. I have family/in-laws in west-central Indiana and in the Ft. Wayne/Bluffton/Decatur/Monroe area.

    Also in-laws near Holgate and Rockford, OH. Cannot FTF transfer between our states, but might be able to work out an in-law visit and local transfer in these areas of OH.

    If cannot work out an FTF trade, I will have it shipped from my FFL to yours for $20.

    If a FTF deal is made, will take CASH ONLY. If I am to ship this pistol, payment in the form of CASH or CASHIER'S CHECK/Bank Check only, please.

    Willing to trade for: H&K P7M8 or PSP in like condition

    Possible trades can include:
    18" barreled shotgun (Rem 870, M'berg 500)
    H&K USP 9c (DA/SA variants only)
    H&K P2000sk V3 in 9mm
    Ruger Mk II or III (22/45 is OK) with some kind of high-viz sights
    Ruger 10/22
    Romanian TT-33 (fires the 7.62x25 Tokorev cartridge)
    Browning BL-22
    Browning Buckmark with some kind of high-viz sights
    Walther P99c AS 9mm
    .357 Lever rifle
    9mm carbine

    Please PM me with your interest.

    Deal in confidance with me! Others have (Ri22o, AllenM, Muncie21)...I'm a nice feller. :-)

    *I reserve the right to cancel this sale add pending any outside sales/trades that I find on my own.*

    -J-
     
    Last edited:

    Indy_Guy_77

    Grandmaster
    Rating - 100%
    16   0   0
    Apr 30, 2008
    16,576
    48
    Again...bump.

    Close to pulling the add and having a friend throw it on Gunbroker...then y'all are hosed! :D

    PM with questions not covered in the text.

    Will also consider trades for/including firearms not in the above list.

    -J-
     

    Ri22o

    Shooter
    Rating - 0%
    0   0   0
    Feb 7, 2008
    2,297
    36
    Speedway
    I had a chance to check this out when I met him to pick up his P22. It's in exactly the condition he says it is, which is damned near perfect. Honestly, he shouldn't have shown it to me because it's so tempting. If I had the money, I would have taken it off of his hands.
     
    Status
    Please reply by conversation.
    Top Bottom