***No longer for sale. I knew I'd regret it. ***
Hey all.
This carbine has ~3,000 rounds, but parts have been replaced and upgraded. Here are the details:
Basics:
- Eagle Arms lower receiver (same as Armalite)
- Eagle Firearms upper receiver
- Chamber is 5.56
- Barrel is 1:9
Accesories and upgrades:
- EOTech 552
- A.R.M.S. #40A2
- New BCG (shrouded) at ~1,000
- Upgraded recoil spring from Tactical Springs at ~2,000 rounds
- Upgraded extractor from EAG Tactical at ~2,000 rounds
- Upgraded extractor five-coil spring from Tactical Springs at ~2,000
- Gas key has been staked per mil-spec and counter-staked
- Castle-nut has been staked per mil-spec
- Receiver end plate from Gear Sector
- Single-point sling from Gear Sector
- Buttpad
- Midwest Industries two-piece rail (very sturdy)
- Viking Tactics light mount
- Surefire G2 Nitrolon
- Rail covers on the sides and rail ladders above and under the rail
- KAC vertical foregrip
Past problems:
- Broken bolt catch; replaced with an RRA part
- Experienced three failures to extract during an intensive course. Replaced extractor with one from EAG's kit and did not have any more problems.
FYI:
- The EOTech was mounted on my duty rifle in OIF and has some dings and scratches, but nothing major. If they bother you, I can blue them. Please see pic below.
- The BCG had a tiny burr on the end that left marks on the buffer. The burr was so small that could not be felt with a man's finger. The marks on the buffer may seem deep, but it's an optical illusion as the surface is actually smooth. Please see pic below.
- I have taken great care of this carbine as it is my home defense carbine.
- I will probably hate myself for selling it.
I think that covers it. If I missed anything, I apologize.
I would like (old price $1,600) $1,500 for it as it is; FTF in Marion Co.
I would like (old price $1,000) $900 for it exluding buttpad, sling, EOTech, VT light mount, light, KAC VFG, rail covers, and ladders; FTF in Marion Co.
While it's not a huge deal, I'll throw in a bottle of Machine Gunner's Lube.
If you have a -1 on this site, do not bother to make an offer unless you think the feedback was unjust, in which case, I will look at the thread and decide.
I will also have this posted on another board. If I will find an offer from each site when I check on the status of my thread, I will honor the first offer and provide the second a screenprint with the time and date of the first offer.
Hey all.
This carbine has ~3,000 rounds, but parts have been replaced and upgraded. Here are the details:
Basics:
- Eagle Arms lower receiver (same as Armalite)
- Eagle Firearms upper receiver
- Chamber is 5.56
- Barrel is 1:9
Accesories and upgrades:
- EOTech 552
- A.R.M.S. #40A2
- New BCG (shrouded) at ~1,000
- Upgraded recoil spring from Tactical Springs at ~2,000 rounds
- Upgraded extractor from EAG Tactical at ~2,000 rounds
- Upgraded extractor five-coil spring from Tactical Springs at ~2,000
- Gas key has been staked per mil-spec and counter-staked
- Castle-nut has been staked per mil-spec
- Receiver end plate from Gear Sector
- Single-point sling from Gear Sector
- Buttpad
- Midwest Industries two-piece rail (very sturdy)
- Viking Tactics light mount
- Surefire G2 Nitrolon
- Rail covers on the sides and rail ladders above and under the rail
- KAC vertical foregrip
Past problems:
- Broken bolt catch; replaced with an RRA part
- Experienced three failures to extract during an intensive course. Replaced extractor with one from EAG's kit and did not have any more problems.
FYI:
- The EOTech was mounted on my duty rifle in OIF and has some dings and scratches, but nothing major. If they bother you, I can blue them. Please see pic below.
- The BCG had a tiny burr on the end that left marks on the buffer. The burr was so small that could not be felt with a man's finger. The marks on the buffer may seem deep, but it's an optical illusion as the surface is actually smooth. Please see pic below.
- I have taken great care of this carbine as it is my home defense carbine.
- I will probably hate myself for selling it.
I think that covers it. If I missed anything, I apologize.
I would like (old price $1,600) $1,500 for it as it is; FTF in Marion Co.
I would like (old price $1,000) $900 for it exluding buttpad, sling, EOTech, VT light mount, light, KAC VFG, rail covers, and ladders; FTF in Marion Co.
While it's not a huge deal, I'll throw in a bottle of Machine Gunner's Lube.
If you have a -1 on this site, do not bother to make an offer unless you think the feedback was unjust, in which case, I will look at the thread and decide.
I will also have this posted on another board. If I will find an offer from each site when I check on the status of my thread, I will honor the first offer and provide the second a screenprint with the time and date of the first offer.
Last edited: