**WITHDRAWN**
I'm in New Haven.
Buyer must be legal to own firearms.
All local/state/federal laws apply.
Tisas .45 SS Carry
- Bobtailed
- Bobnosed
- Ballcut at front lower slide
- Flat topped and custom design serrations/ballcuts
- French border
- Heavy lower slide bevel
- Lightening ports
- Rear of slide/frame blended
- Frame feed ramp recut to correct angle and length for proper feeding (factory had it at 35.5 degrees and short at .325")
- VIS recut to give proper clearance (to prevent barrel feet to frame contact)
- EGW barrel bushing/spring plug/extractor/ejector/firing pin stop
- Wolff 20# recoil spring and extra power firing pin spring
- Short trigger
- Ed Brown extended mag release
- Fusion mainspring housing
- Dawson F/O front sight
2 factory 8rd mags (1 mag is junk)
2 sets of Coolhand G10 grips (green and coyote)
287 rounds fired thru it
Trigger pull is smooth with a crisp break, pull weight around 3 1/4 lbs.
All work performed by me, a lot of it is in this thread here: https://www.indianagunowners.com/threads/1911-bobtail-carry-cut.540299/
Mainspring housing cerakoted black.
Barrel bushing and spring plug rust blued.
It's really enjoyable and more accurate than you would think.
One of my favorite .45 1911's ever, you will not find another like this one.
$900 $850
No trades, I'm funding a motorcycle purchase.
I'm in New Haven.
Buyer must be legal to own firearms.
All local/state/federal laws apply.
Tisas .45 SS Carry
- Bobtailed
- Bobnosed
- Ballcut at front lower slide
- Flat topped and custom design serrations/ballcuts
- French border
- Heavy lower slide bevel
- Lightening ports
- Rear of slide/frame blended
- Frame feed ramp recut to correct angle and length for proper feeding (factory had it at 35.5 degrees and short at .325")
- VIS recut to give proper clearance (to prevent barrel feet to frame contact)
- EGW barrel bushing/spring plug/extractor/ejector/firing pin stop
- Wolff 20# recoil spring and extra power firing pin spring
- Short trigger
- Ed Brown extended mag release
- Fusion mainspring housing
- Dawson F/O front sight
2 factory 8rd mags (1 mag is junk)
2 sets of Coolhand G10 grips (green and coyote)
287 rounds fired thru it
Trigger pull is smooth with a crisp break, pull weight around 3 1/4 lbs.
All work performed by me, a lot of it is in this thread here: https://www.indianagunowners.com/threads/1911-bobtail-carry-cut.540299/
Mainspring housing cerakoted black.
Barrel bushing and spring plug rust blued.
It's really enjoyable and more accurate than you would think.
One of my favorite .45 1911's ever, you will not find another like this one.
No trades, I'm funding a motorcycle purchase.
Last edited: