IndyMonkey
Shooter
- Jan 15, 2010
- 6,835
- 36
-
Be sure to read this post! Beware of scammers. https://www.indianagunowners.com/threads/classifieds-new-online-payment-guidelines-rules-paypal-venmo-zelle-etc.511734/
New AR15
- Thread starter IndyMonkey
- Start date
The #1 community for Gun Owners in Indiana
Member Benefits:
Fewer Ads! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
IndyMonkey
Shooter
- Jan 15, 2010
- 6,835
- 36
Specs.
Model (A) Upper Specs
-Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hardcoat Anodized finish, T-markings, ARFCOM logo and M4 feed ramps. Mil-Spec Dryfilm lube on the inside of the upper receiver.
-These Mil-Spec M4 flat top upper receivers are made and designed to be used with our piston system. The op-rod hole is the proper diameter so a bushing is not required at all, and the cam pin slot has been optimized for a piston system.
-Daniel Defense Barrel is Cold Hammer Forged 4150 Chromoly Vanadium Alloy, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Mil-Spec Phosphate finish on the outside.
-16" Mid-Length Government profile with Mid-length gas system.
-Barrel is Phosphate finished under the Gas piston block.
Gas Piston Block Specs
-Machined from High quality stainless steel.
-Low profile design.
-Pinned to the barrel using (2) 1/8 hardened straight pins.
-The piston block has 3 gas settings: full gas, suppressed, and no gas (single shot)
-The piston Block is Melonite coated inside and out.
Piston Plug and Op Rod Specs
-Both are machined from High quality stainless steel.
-Melonite coated inside and out.
-The system can be broken down from the front, requiring no tools.
Bolt/Carrier Specs
-The carriers are a 1pc design with a solid key. (No bolt on carrier key)
-The carriers have skies as well as a champher on the rear end of it to prevent carrier tilt and drag.
-The carriers are Melonite coated inside and out and Engraved with our Spider logo.
-The Hard Chrome MP tested bolts are spring loaded.
-Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
-9" Daniel Defense Lite rail.
-Spike's Tactical Billet charging handle.
-Phantom 52C Flash Hider.
Model (A) Lower Specs
-Spike's Tactical Lower, Machined from a 7075 T6 Mil-Spec Forging, Mil-Spec Type III Hardcoat Anodized finish, Laser engraved with AR15.com logo.
-Mil-Spec lower parts kit with Rounded hammer.
-Nickel Boron coated Trigger, Hammer, and Disconnector. (The smoothest and most durable Factory trigger you will ever feel)
-Magpul MOE trigger guard.
-Magpul MOE Grip.
-KNS Gen II Mod II Anti-Rotation trigger and hammer pins.
-6 Position Mil-Spec buffer tube, castle nut and Properly staked DD receiver end plate with sling QD socket.
-ST-T2 Tungsten Heavy buffer.
-Mil-Spec 17-4 stainless steel buffer spring.
-Magpul ACS stock.
-Color Fill on Selector markings.
Model (A) Accessories
-Spike's Tactical Custom Carry Case in Brown.
-Front and Rear Troy BUIS.
-Two Magpul 30rd Pmags
-Rail mounted DD sling QD socket.
-2 point sling.
Model (A) Upper Specs
-Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hardcoat Anodized finish, T-markings, ARFCOM logo and M4 feed ramps. Mil-Spec Dryfilm lube on the inside of the upper receiver.
-These Mil-Spec M4 flat top upper receivers are made and designed to be used with our piston system. The op-rod hole is the proper diameter so a bushing is not required at all, and the cam pin slot has been optimized for a piston system.
-Daniel Defense Barrel is Cold Hammer Forged 4150 Chromoly Vanadium Alloy, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Mil-Spec Phosphate finish on the outside.
-16" Mid-Length Government profile with Mid-length gas system.
-Barrel is Phosphate finished under the Gas piston block.
Gas Piston Block Specs
-Machined from High quality stainless steel.
-Low profile design.
-Pinned to the barrel using (2) 1/8 hardened straight pins.
-The piston block has 3 gas settings: full gas, suppressed, and no gas (single shot)
-The piston Block is Melonite coated inside and out.
Piston Plug and Op Rod Specs
-Both are machined from High quality stainless steel.
-Melonite coated inside and out.
-The system can be broken down from the front, requiring no tools.
Bolt/Carrier Specs
-The carriers are a 1pc design with a solid key. (No bolt on carrier key)
-The carriers have skies as well as a champher on the rear end of it to prevent carrier tilt and drag.
-The carriers are Melonite coated inside and out and Engraved with our Spider logo.
-The Hard Chrome MP tested bolts are spring loaded.
-Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
-9" Daniel Defense Lite rail.
-Spike's Tactical Billet charging handle.
-Phantom 52C Flash Hider.
Model (A) Lower Specs
-Spike's Tactical Lower, Machined from a 7075 T6 Mil-Spec Forging, Mil-Spec Type III Hardcoat Anodized finish, Laser engraved with AR15.com logo.
-Mil-Spec lower parts kit with Rounded hammer.
-Nickel Boron coated Trigger, Hammer, and Disconnector. (The smoothest and most durable Factory trigger you will ever feel)
-Magpul MOE trigger guard.
-Magpul MOE Grip.
-KNS Gen II Mod II Anti-Rotation trigger and hammer pins.
-6 Position Mil-Spec buffer tube, castle nut and Properly staked DD receiver end plate with sling QD socket.
-ST-T2 Tungsten Heavy buffer.
-Mil-Spec 17-4 stainless steel buffer spring.
-Magpul ACS stock.
-Color Fill on Selector markings.
Model (A) Accessories
-Spike's Tactical Custom Carry Case in Brown.
-Front and Rear Troy BUIS.
-Two Magpul 30rd Pmags
-Rail mounted DD sling QD socket.
-2 point sling.
jblomenberg16
Grandmaster
Very cool...nice SEBR! 
smiley69_300
Expert
I dont know anything about AR's. But thats a bad a$$ looking gun. lol
shooter521
Certified Glock Nut
Wow, nice! Spikes, DD, Magpul, Troy, Trijicon... throw in some LaRue and Noveske and you'd have the whole 
package on one rifle!
package on one rifle!
billyboyr6
Expert
thats is sweeeeeeet,
IndyMonkey
Shooter
- Jan 15, 2010
- 6,835
- 36
Wow, nice! Spikes, DD, Magpul, Troy, Trijicon... throw in some LaRue and Noveske and you'd have the whole
No reason to hate.
Digital_photog
Sharpshooter
you need to send it to me. I will test it shooting 3 gun and make sure it is OK. 
IndyMonkey
Shooter
- Jan 15, 2010
- 6,835
- 36
you need to send it to me. I will test it shooting 3 gun and make sure it is OK.
You can borrow it if you get me into shooting 3 gun. Kind of like a friendship payment.
Site Supporter
Staff online
-
mom45Momerator
Members online
- 15kiserc
- Phil502
- roibroker
- AlienRayGun
- Combat Engineer
- stale_ranch
- Taeverling
- tom1025
- JettaKnight
- Jowl1
- BR8818
- morve80
- Twinks46975
- freekforge
- 1775usmarine
- Meatstick
- tca1352
- Chip
- ben142266
- rdbs505
- SS 396
- BackFromDC
- Indoor assassin
- Kenjiboijoi
- Myrradah
- sadclownwp
- Timjoebillybob
- swamptick
- Glock22
- EMS99
- mom45
- flightsimmer
- BigBoxaJunk
- Rick Mason
- shadow64
- indyblue
- SEIndSAM
- Redacted
- awames76
- Sdiersing
- 11infantryb
- loudgroove
- Brandon
- jtmiller951