***4th Gen Monte Carlo SS Parts***
Cutlass Shroud for Elec Fan Conversion $75
7) Jeep Steering Shaft Upgrades $35
BellTech Blazer Spindles #2102 NIB with New Premium SKF Hubs #BR930497 $550
C5 Brackets for Blazer Spindles FlyNBye #C5SBLZ NIB $70 *with #2102 Spindles and C5 Rotors $700
2) Hubs for C5 Conversion New NAPA #85727-Fit Inside C5 Rotors $50ea. Sold in Pairs Only
3rd Gen F Body Serp Brackets $150
3rd Gen F Body Clutch & Brake Pedals $100
2 sets) Rr LS1 backing plates $150pr.
Edelbrock Rear Control Arm Braces #5210 $75
1985 Monte Carlo SS ECM $50
Pre-87 Taillights and 1/4 Extensions $50
Quad Gauge Set $50
***3rd Gen Camaro/Firebird/TransAm Parts***
1) F-Body Aluminum Driveshafts $120ea.
4th Gen LT1 rear end with disc brakes $300
3rd Gen Sway Bars front/rear $70
2) Hubs for C5 Conversion New NAPA #85727-Fit Inside C5 Rotors $50ea. Sold in Pairs Only
3rd Gen Serp Brackets $150
3rd Gen Clutch & Brake Pedals $100
3rd Gen Lo Rise Spoiler $30
3rd Gen Drivers Power Seat Track $50
2 sets) Rr LS1 backing plates $150pr.
Exhaust Manifolds 2.25" CMC2 for 350 3rd Gen $50
***Engine Parts***
*Most engine parts are low mileage, approximately 500-700 miles and are notated with a "#" at the beginning of the listing*
Billet Specialties Tall SBC Valve Covers Perimeter Bolt #95229 $75
5" Tachometer Sport Comp #3905 $175 NIB
5" Tachometer Ultra Lite II #4999 $200
3 3/8" 120MPH Sport Comp #3992 $70 New
5.7L Engine Block with crank/rods 1pc RMS $50
MSD Plug Wires $50 NIB
#-Oil Pan Milodon #30900-Windage Tray #32100-Baffle #32500-Oil Pump #P55HV-Pickup #18311 and studs $225
#-2 pc. Aluminum Timing Cover Edelbrock #4242 $60
#-Crane Gold Rocker Arms 1.5 Ratio #10750-16 $300
#-Crane Hardened Pushrods +.100 $80
Crane Fuel Pump Pushrod Bronze Tip for Billet Cam NIB $10
#-Clevite Oil Pump Drive-hardened $10
Exhaust Manifolds 2.25" CMC2 for 350 3rd Gen $50
#-Timing Chain and Gears Cloyes 9-3100A Billet adj. $100
#-Lunati 60104 Cam and Lifters $150
Motor Mount Steels $20pr.
1pc RMS Flexplate New $20
#-Lokar Oil Dipstick and Tube #5002 $35
***Miscellaneous (Some fit the F & G Bodies)***
4) C5 Z06 wheels $150ea. 3 Alcoas, or 1 Speedline with minor crack $50 or $450 for all 4
1 Set) Rr. Z06 Calipers-Red NIB $150
Front C5 abutments $100pr. New
Sparco Jade Royal Blue Racing Suit Size L $250 NIB
2) Hubs for C5 Conversion $50ea.
C5 Rotors Front $60ea.
4th Gen F Body seats (Grey Cloth-Front and Rear) $100
Blue Corbeau Forza Seats $50pr.
Willing to work package deal. Let me know what you need. Most of this is from a defunct NASA CMC project. I have these parts at a couple different locations but are all on the NW side of Indianapolis and near me.
Trade Interests:Glocks 34, 17, & 19 Gen 2s and Gen 3s; Beretta 92FS/92FS-C/M9; Remington 870 Wingmaster 12 or 20 ga; 9mm 1911 Kimber or SA; Reloading Equipment for 9mm, 45acp/gap and 12/20ga
Cutlass Shroud for Elec Fan Conversion $75
7) Jeep Steering Shaft Upgrades $35
BellTech Blazer Spindles #2102 NIB with New Premium SKF Hubs #BR930497 $550
C5 Brackets for Blazer Spindles FlyNBye #C5SBLZ NIB $70 *with #2102 Spindles and C5 Rotors $700
2) Hubs for C5 Conversion New NAPA #85727-Fit Inside C5 Rotors $50ea. Sold in Pairs Only
3rd Gen F Body Serp Brackets $150
3rd Gen F Body Clutch & Brake Pedals $100
2 sets) Rr LS1 backing plates $150pr.
Edelbrock Rear Control Arm Braces #5210 $75
1985 Monte Carlo SS ECM $50
Pre-87 Taillights and 1/4 Extensions $50
Quad Gauge Set $50
***3rd Gen Camaro/Firebird/TransAm Parts***
1) F-Body Aluminum Driveshafts $120ea.
4th Gen LT1 rear end with disc brakes $300
3rd Gen Sway Bars front/rear $70
2) Hubs for C5 Conversion New NAPA #85727-Fit Inside C5 Rotors $50ea. Sold in Pairs Only
3rd Gen Serp Brackets $150
3rd Gen Clutch & Brake Pedals $100
3rd Gen Lo Rise Spoiler $30
3rd Gen Drivers Power Seat Track $50
2 sets) Rr LS1 backing plates $150pr.
Exhaust Manifolds 2.25" CMC2 for 350 3rd Gen $50
***Engine Parts***
*Most engine parts are low mileage, approximately 500-700 miles and are notated with a "#" at the beginning of the listing*
Billet Specialties Tall SBC Valve Covers Perimeter Bolt #95229 $75
5" Tachometer Sport Comp #3905 $175 NIB
5" Tachometer Ultra Lite II #4999 $200
3 3/8" 120MPH Sport Comp #3992 $70 New
5.7L Engine Block with crank/rods 1pc RMS $50
MSD Plug Wires $50 NIB
#-Oil Pan Milodon #30900-Windage Tray #32100-Baffle #32500-Oil Pump #P55HV-Pickup #18311 and studs $225
#-2 pc. Aluminum Timing Cover Edelbrock #4242 $60
#-Crane Gold Rocker Arms 1.5 Ratio #10750-16 $300
#-Crane Hardened Pushrods +.100 $80
Crane Fuel Pump Pushrod Bronze Tip for Billet Cam NIB $10
#-Clevite Oil Pump Drive-hardened $10
Exhaust Manifolds 2.25" CMC2 for 350 3rd Gen $50
#-Timing Chain and Gears Cloyes 9-3100A Billet adj. $100
#-Lunati 60104 Cam and Lifters $150
Motor Mount Steels $20pr.
1pc RMS Flexplate New $20
#-Lokar Oil Dipstick and Tube #5002 $35
***Miscellaneous (Some fit the F & G Bodies)***
4) C5 Z06 wheels $150ea. 3 Alcoas, or 1 Speedline with minor crack $50 or $450 for all 4
1 Set) Rr. Z06 Calipers-Red NIB $150
Front C5 abutments $100pr. New
Sparco Jade Royal Blue Racing Suit Size L $250 NIB
2) Hubs for C5 Conversion $50ea.
C5 Rotors Front $60ea.
4th Gen F Body seats (Grey Cloth-Front and Rear) $100
Blue Corbeau Forza Seats $50pr.
Willing to work package deal. Let me know what you need. Most of this is from a defunct NASA CMC project. I have these parts at a couple different locations but are all on the NW side of Indianapolis and near me.
Trade Interests:Glocks 34, 17, & 19 Gen 2s and Gen 3s; Beretta 92FS/92FS-C/M9; Remington 870 Wingmaster 12 or 20 ga; 9mm 1911 Kimber or SA; Reloading Equipment for 9mm, 45acp/gap and 12/20ga
