Frontier Safe

[mm8385]

Hello!
I moved my thread over! I know it's an old safe but I have no way to change the (mechanical lock) code as we bought it used. Frontier Safe. I was just throwing it out there to see if anyone had any thoughts? Thanks!

 

[marvin02]

Change my combination? - S&G

Important: You must have the correct change key. Do not set the third number of the combination between 5 and 11 on a lock with a dial splined at 50. …

sargentandgreenleaf.com

How to change the combination on a Sargent and Greenleaf mechanical lock

Here is how you can change the combination on a Sargent and Greenleaf mechanical lock. Before we get started make sure you have a combo change key in hand. Sargent & Greenleaf Combination Changing Instructions 3-Wheel Standard Size Locks NOTE: READ COMPLETE INSTRUCTIONS BEFORE OPERATING THE LOCK...

homelandsafes.com

In your other thread @Mgderf suggested you have an S&G lock, maybe the above will help.

 

[Gaffer]

Hello!
I moved my thread over! I know it's an old safe but I have no way to change the (mechanical lock) code as we bought it used. Frontier Safe. I was just throwing it out there to see if anyone had any thoughts? Thanks!

If you have the current combination and can open the safe you CAN setup a new combination (see video above). You will need to get a change key to do so.
If you are not comfortable with this procedure, most locksmiths can change the combo in minutes.

 

[mm8385]

If you have the current combination and can open the safe you CAN setup a new combination (see video above). You will need to get a change key to do so.
If you are not comfortable with this procedure, most locksmiths can change the combo in minutes.

OK......my bad...again...its electronic! keypad

 

[Gaffer]

OK......my bad...again...its electronic! keypad

:>). No problem, they can be changed as long as you have the current combination. Most of them work the same way, and most safe brands use only a few of the electronic lock brands, but you may need to search youtube for the model you have.

Here is an example of the La Gard lock which is used a lot on different safes.



DO NOT close the door until you are totally confident all is working good.

 

[mm8385]

:>). No problem, they can be changed as long as you have the current combination. Most of them work the same way, and most safe brands use only a few of the electronic lock brands, but you may need to search youtube for the model you have.

Here is an example of the La Gard lock which is used a lot on different safes.



DO NOT close the door until you are totally confident all is working good.

Awesome! Thank you so much!!! I'll try this when I get home from work!!