So I put in the Tapco AK trigger and now when the bolt cycles back, it doesn't reset the hammer and when the bolt chambers the second round the hammer lightly strikes the primer of that newly chambered round. I doesn't strike enough to cause a double-fire (or hasn't yet). If I manually pull the BCG back, it does reset the trigger/hammer, so it has to be an issue with either the recoil spring or something in the trigger group binding just before to hammer is reset. My thought is to cut off a coil of the recoil spring and re-assemble to see if that fixes the problem.
Any thoughts?
Problem Solved:
Thanks for everyone's help. Disconnector spring was missing.
Any thoughts?
Problem Solved:
Thanks for everyone's help. Disconnector spring was missing.
Last edited: