slackerisme
Expert
I set up my press and fired off 20 or so 9mm rounds. The rounds jam in the barrel of my p11. Upon inspection it appears the rounds are coke bottle shaped. Belled at the bottom and there is a visible line at the base of the bullet.
I have adjusted the decapper so it barely deprimes the round through to the die hitting the shell plate. I have turned the powder die out so there is a barely visible bell. I have also ran the gambit with my crimp die.
Any suggestions?
I have adjusted the decapper so it barely deprimes the round through to the die hitting the shell plate. I have turned the powder die out so there is a barely visible bell. I have also ran the gambit with my crimp die.
Any suggestions?