YES you can! I do this for glocks and H&K up to .359 diam also in my 9mm baby eagle which is polygonal rifled I load reasonable loads but these are lead cast boolits.
can you do it with jacketed? yes and no with slower powders yes higher end loads with fast powder NO it Can be...
ok I have canned for years, Found 200 of the ball 2 piece glass canning jars (glass lid with the wire bail clip)I forgot i had problem is i have none of the rubber seal rings where in the devil can i get some? I have narrow and wide mouth jars pints/qts and a few half gallon jars...
ok we are family of six. we hunt,fish,garden, can and freeze, starting in spring with goats, rabbits, chickens, ducks,turkeys and geese.(raised all of these before)
big question is how much salt should we have to be self sufficient for year or two? I say 1200-1500 lbs and could be used...
Well lee mule snot works but, messy so I dip lubed to fill the lube grooves, let dry then ran them thru a lee push-thru die backwards!!!!!! Wallah! Clean bullet with lube grooves filled! Rest of boolit is clean not sticky!!
Berdan = scrap Boxer? well i have done them and OLD steel cases 2 or 3 times with low loads AND do not have to chase 'em BUT i started with cast bullets and low charges
Ok looking for a reliable 5-10 mile range and something to make it harder to listen in on(coded) also the base unit needs have capability of 12 volt dc and or 110V and possible listen to short wave and or EMS and weather.
anything like that around????
MUST use pure lead! i used to shoot these in a 1-32 twist traditions 50 cal inside of 80 yards they shot great and did a good job on deer. i always deburr the mold and use beeswax to lube the mold per directions. My gun with buckhorn sights would do 2-3 inch@ 80 yards plenty for deer...