Treadmill has been turned into a brass tumbler for exercising your fat brass.
Maybe someone can help me embed this video instead of the link?
Youtube treadmill link
Another video http://youtu.be/qouLKaxLj6s
Here are some more pictures. I still need to clean up the drum and glue it. The pvc was free from the local plumbing supply as the end was cracked. I need to decide how long to cut it.
I need to shorten it just a bit and maybe install some type of wheel or bearing to keep it from hitting the metal piece just to the bottom right of the sticker.
Need to reinstall the back cover for the wiring and anchor the ground wire
Need to trim off all of the ends of the support bars even. I left them plenty long for any adjustments needed. This thing could hold a small drum considering it usually has people running on it.
I reinstalled the motor cover
I ordered 25 pounds of ss pins today. I am going to sell what I decide not to use. I was not sure how much to use in the drum.
I bought the cap, reducer and the rubber cap (not pictured) all from Menards for about $20. I spent about $10 max on nuts, bolts, and washers so the most expensive part for me was the ss pins. That is a tumbler on a budget!
I have some before and process pictures that I posted on another sight but I was not sure if I could link to it or not so I just uploaded the mostly finished product.
Maybe someone can help me embed this video instead of the link?
Youtube treadmill link
Another video http://youtu.be/qouLKaxLj6s
Here are some more pictures. I still need to clean up the drum and glue it. The pvc was free from the local plumbing supply as the end was cracked. I need to decide how long to cut it.
I ordered 25 pounds of ss pins today. I am going to sell what I decide not to use. I was not sure how much to use in the drum.
I bought the cap, reducer and the rubber cap (not pictured) all from Menards for about $20. I spent about $10 max on nuts, bolts, and washers so the most expensive part for me was the ss pins. That is a tumbler on a budget!
I have some before and process pictures that I posted on another sight but I was not sure if I could link to it or not so I just uploaded the mostly finished product.