A2 Flash Hider vs. BattleComp 2.0
by esrice
by esrice
During this past weekend's range outing, I enlisted the help of shooter521 and troy_mp to help me film a comparison of the new BattleComp 2.0 to the standard A2 flash hider. This particular test compared the BattleComp's muzzle rise eliminating capabilities. I will do a flash hiding comparison at a later date.
http://www.youtube.com/watch?v=Zc5sjVDQGnE
Here were my impressions:
First, I think we may have used an inappropriate host. Allow me to clarify. . .
This was my first time firing my Noveske 10.5" upper. I was VERY surprised at how little muzzle rise it had in the first place, regardless of the fact that it utilized a standard A2 flash hider-- especially since it has a 10.5" barrel and I'm used to shooting 16" guns. Because of this, I don't think the felt difference (which was considerable) translated as well on film.
So keeping that in mind, allow me to attempt to quantify the differences I felt between the standard A2 and the BattleComp 2.0.
Shooting with the BC2 was very different than shooting with the A2. It made the recoil impulse feel light and "hollow" (if that makes any sense). When a round would go off, it was almost as if the gun became momentarily lighter. There is a clear yet noticeable gas "cloud" that comes out the front in an up and out direction.
When looking through an optic, such as my Aimpoint H1, I noticed a shrinking of my typical "wobble zone" during strings of fire. I was able to keep the dot on target and spend less time bringing it back down to point-of-impact.
Shooting was slightly more "blasty" with the BC2, but not anything like a traditional compensator. Shooters on my left and right could feel some concussion, but it wasn't uncomfortable and they both reported that they would be able to sustain an entire training class next to the gun without issue.
I've asked my partners-in-crime to respond here with their impressions, as everyone's shooting experience is unique.
Installation is the same as every other muzzle device for your AR. BattleComp Enterprises includes a shim kit of various sized shims to ensure a proper alignment. Simply unscrew your A2, remove the crush washer, slip on the correct combo of shims, and screw on the BattleComp such that the company logo is facing straight down.
The BC2 is a nice looking brake. It resembles a KAC Triple Tap brake, but for considerably less $$. At $165, however, its still more expensive than most popular flash hiders and brakes currently on the market.
It is dimensionally the exact same size as the standard A2 which means it has the added benefit of being compatible with the GEMTECH HALO 5.56 suppressor.
You can purchase the BattleComp 2.0 direct from BattleComp Enterprises, or from a few select online vendors. I'm not aware of anyone that carries them locally.
Battle Comp Enterprises, LLC
Feel free to ask questions and I'll attempt to answer them. Bear in mind that you really do need to shoot one to understand it, but I'll do my best to answer your questions. As always, anyone is welcome to shoot it on my SBR if you're interested.
Last edited: